Tag Archives: Quatro Air

05.11.24
by

SPH426 Fume Extractor for Laser Marking, Engraving, Cutting

Introducing the SPH426 Fume Extractor by Quatro Air

STANDALONE FILTERED EXHAUST

This is a self contained unit, that connects to the laser engraver via flexible heavy duty grounded hose that is provided. The inlet diameter can accommodate a 2″, 3″ or 4″ collar hose connection.

Discharge is recirculated back into the room via vents at the bottom of the system. However, there is an optional side collar adapter kit to allow venting to the exterior if required. The unit is very quiet, and takes up very little floor space (approx. 1.25 sq. ft.)At 30 inches high the unit is ideal to be tucked under a table. This can save precious floor space. If required, the entire system is easily relocated via industrial grade casters on the bottom of the exhaust unit. All the filter elements can be replaced without the need for tools in very short order. The inexpensive filters make this an economical solution for most end users.  

Installation – Easily Assembled, requires no tools

This unit is easily assembled, requires no tools, no need for a technician. The deep bed chemical filter allows for maximum VOC removal.  The chemical filter is lowered in from the top lid. The 99.97% HEPA filter guarantees the removal of particles as small as 0.3 microns in diameter.

| Learn More |

05.07.24
by

CSA 600 Laser Fume Extractor

Designed for large  Laser cutting, marking, engraving and AMT systems

The CSA 600 Fume Extractor series is the ideal solution for heavy duty laser applications

FEATURES:
Designed for large Laser cutting, marking, engraving and AMT systems
Multi-stage filtration system: filter bag (or high capacity pleated filter), medical grade HEPA and chemical filter
Refillable, 15” deep chemical filter module, up to 66 lbs. (30kg)
LaserBlue gel seal guarantees ZERO FILTER BYPASS
Dual high speed turbine for high suction, pressure and airflow
Office friendly, whisper quiet operation
Digital control panel
Enhanced mobility with heavy duty lockable casters

| Learn More |

Contact us:

11.28.23
by

Use only genuine Quatro HEPA filters, Pre-filters, Chemical Gas Odor Filters

Replacement filters for your Quatro Air Filtration Systems, Air Purifiers, Fume, Dust Extractors
07.10.23
by

Replacement filters for your Quatro Air Filtration Systems, Air Purifiers, Fume, Dust Extractors

Use only genuine Quatro HEPA filters, Pre-filters, Chemical Gas Odor Filters

Replacement Genuine Tested Quatro HEPA Filters, Pre-filters, Hi-Cap Filters for your Quatro Air Purifiers
BP1000-IF [Isolation-Filtration]
Advanced HEPA Filtration with UV Light
Negative Pressure or Recirculating Air
For healthcare facilities, isolation rooms and infection control areas – CSA (US) approved – single patient room
BP1000-NP (aka AF1000-NP) Negative Pressure Air Filtration Systems –
Replacement Chemical Gas Odor Filters – Bulk Media Refill Kits for Economy, Good for the Environment
HEPA Filters, Hi Cap Filters, Dust Pre-filters

Contact us for all your Quatro Air Replacement Filter Needs:

03.24.23
by

Multi-Station Soldering Fume Extractor Series, SPH470 and SPH870, 4 and 8 Stations

SPH 470 Fume Extractor series – 4 Stations

The SPH 470 Fume Extractor series is an excellent multi-station solution for heavy duty applications. Featuring a multi-stage filtration system with multiple filter sequence configurations to address your needs, an iSeries (digital) control panel and heavy duty lockable casters, the SPH 470 Fume Extractor series provides everything you need in a fume extraction system.

Features

iSeries (digital) control panel
Multi-stage filtration system with HEPA
25 ft hose included
4 capture arms included

Benefits

Compact plug and play design
Ultra-small footprint
Whisper quiet operation
CE and CSA-certified, RoHS compliant

Options

Dual Infinity or Single Brushless motors
3″ or 4″ diameter inlet / hose
Multiple filter sequence configurations (request for Technical Specifications)
Knockout pad – F166
Universal cable – E427

SPH 870 Fume Extractor series – 8 Stations

The SPH 870 Fume Extractor series provides a cost-effective fume extraction solution for heavy duty applications. Featuring a multi-stage filtration system with multiple filter sequence configurations to address your needs, an iSeries (digital) control panel, and heavy duty lockable casters for portability, the SPH 870 Fume Extractor series provides everything you need in a multi-station fume extraction solution.

Features

iSeries (digital) control panel
Multi-stage filtration system with HEPA
Two 50 ft hoses included
8 capture arms included

Benefits

Portable plug and play design
Ultra-small footprint
Whisper quiet operation
CSA-certified, UL and RoHS compliant

Options

Three Infinity or Dual Brushless motors
3″ or 4″ diameter inlets / hoses
Multiple filter sequence configurations (request for Technical Specifications)
Knockout pad – F166
Universal cable – E427

Contact us for more information, pricing, etc:

02.10.23
by

Fume and Dust Extractor, Air Filtration System Auto Flow Feature

Auto Flow

“AUTOFLOW” is an automatic system pressure compensation system. After setting the minimum speed required to properly evacuate your equipment, the controls will automatically increase the motor speed to compensate for the increased pressure as a result of filters getting dirty or a system blockage until maximum speed is reached. After a filter change, system will automatically decrease the speed to the original set point.

SPH800 FUME EXTRACTORS FOR HIGH VOLUME LASER CUTTING, MARKING, ENGRAVING & AM SYSTEMS
Download PDF Brochure / Specification Sheet – Brushed Type Motor / Blower Version : https://www.airpurifiers-r-us.com/assets/specsheet-sph835.pdf

Contact us for help with product selection, information, pricing, quotation:

06.29.22
by

BP2000 MULTI-PURPOSE AIR PURIFIER

handle high concentrations of chemicals, gases, odors, particles and biological contaminants

chemicals, gases, odors, particles and biological contaminants
Dimensions: 71x24x26 in / 180x61x66 cm
CFM: 1000 Nominal
Power requirements: 120V/1PH/60Hz 4A / 230V/1PH/60Hz 2A

Designed to handle high concentrations of chemicals, gases, odors, particles and
biological contaminants, the BP2000 delivers superior air quality for residential and
commercial spaces, office buildings, clinics, print shops, labs and any workshops or
production facilities that require effective air filtration.

intelligent control panel

All units come with an intelligent control panel featuring digital speed control and
audible/visual alarms.

necessary filters for the chosen application (gas only, gas and
particles, particles only)

filters for the chosen application (gas only, gas and particles, particles only)

The unit’s standard configuration include adjustable inlet and discharge grilles, power
cord and all the necessary filters for the chosen application (gas only, gas and
particles, particles only).

Click here for the PDF spec sheet

Contact us for help with product selection, pricing, quote request, help with placing your order

12.24.21
by

Merry Christmas and a Happy New Year

We pray that you may enjoy good health and all will go well with you. Maligayang Pasko – Feliz Navidad – Joyeux Noël🎄

Multi-Purpose Air Filtration Systems, Air Purifiers, Air Cleaners, Air Scrubbers – Dust and Chemical Fumes, Gas, Odor Removal And / Or Reduction

10.04.20
by

Wall mounting our BP2000 air filtration systems

Did you know you can wall mount our BP2000 upright, vertical air filtration unit?

Wall mounted BP2000-NP Advanced HEPA Filtration System

11.06.19
by

Intelligent Self-Cleaning HEPA Dust Collectors – iVAC Series

Intelligent Self-Cleaning HEPA Collectors, iVAC Series

903C5580-1F33-4A8A-95A1-1BCB7EE9DBEA

Slimline – Twin – Standard | Intelligent Self Cleaning HEPA Dust Collectors | Quatro Air iVac Series | Call us: 1-800-626-0664 or send us contact form below

Self-cleaning design, microprocessor control

· Audible and visual status indications and alarms
· Whisper quiet performance, 54 dBa
· Speed control with AutoFlow
· Capable of max. pressure 90”(22.5 KPa)
· Maximum airflow 282 CFM (132 l/sec)
· Available in 120V/50Hz or 230V/60Hz, single phase
· Single or dual inlet configurations 1.5”, 2”, 2.5”, 3”, 4”
· Ideal for fine dust applications, CAD/CAM milling
· Slide-n-Glide EXTRA large dust storage drawer
· 3-stage filtration, knock out plate/drawer, self-cleaning cartridge, HEPA filter

Contact Us – for help with product selection, pricing, ordering replacement filters, ordering your iVac air filtration / dust collector system