Monthly Archives: January 2014

01.22.14
by

Air Filtration Air Cleaner for fumes fumes and more fumes

Air Filtration Air Cleaner for fumes fumes and more fumes

Fumes, fumes, fumes, odors, chemical gases – not good for you, for your lungs, for your health – no, not good.

However way, wherever they are produced and generated, be it in a Nail Salon, Spa, Hair Salon, Soldering station, cutting acrylic, plastic, wood, etc with a laser cutting, laser engraving machine, fumes, chemical fumes, chemical gases you can do without.

The Quatro Air SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

The Quatro Air SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

It even comes, as an option, with a dual air intake collar for a couple of flex hose or articulating hoses to attach to them. Great in a scenario where there are two nail acrylic application table along side each other – the SPH400 can be positioned in between the two tables – one (1) fume extractor air filtration system doing the work for two tables or stations.

The SPH400 comes with an impressive list of features.

Protect and care for the health and well being of your nail tech as well as your customer by reducing their exposure to these harmful to health chemical fumes and gases.

  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications
  • We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Contact us for help in choosing the right fume, odor, dust extraction air filtration system for your needs.

Call toll free in North America, 1-800-626-0664. Outside of North America, call 1-514-421-0658, or Skype: lito.espinosa. You may also use the contact form below.

01.16.14
by

Light Duty Source Capture Flex Arm Dust Odor Fumes Air Filtration System

Light Duty Source Capture Flex Arm Dust Odor Fumes Air Filtration System

Capture SOLDER SMOKE, ODOR, & FUMES at source, before they migrate throughout the room

Meet SolderPure

Don’t let the name fool you. It’s not just for soldering application. It’s a light duty fume extractor, extraction system: that’s fumes, odors, dust particles as well.

Available filters:

F071.png (147670 bytes)
F071		 F074.png (255959 bytes)
F074		 F075.png (182148 bytes)
F075		 F072-GPC.png (232862 bytes)
F072-GPC		 F077.png (185295 bytes)
F077

Contact us for help in choosing the right air filtration system for your needs. Call us toll free in North America – USA and Canada: 1-800-626-0664. Outside of North America: 1-514-421-0658. Skype: lito.espinosa

You may also use the contact form below:

01.12.14
by

Air Filtration for Odor Removal Laboratory PVC Pressing Heating Machine

Air Filtration for Odor Removal Laboratory PVC Pressing Heating Machine

Subject:BP-600 Series Quote for ITW xxxxx

Submitted on Fri Jan 10 12:43:05 2014 (GMT).

1. subject = BP-600 Series Quote for ITW xxxxx

2. email = michael.xx@xxxx.com

3. message =

Good Morning,

I am interested in the BreathEasy Pro-600 series for use in a laboratory to remove odor and fumes generated by a machine that is heating and pressing PVC.

Which filter options do you recommend for this application?

How many working hours do you expect these filters to last for various conditions?

Can you send me technical information on the product such as the amperage draw and the power output of the motor, as well as the flow rate of the model?

In addition, can you send me a quote for the BP-600 and the filters you recommend, as well as a quote for replacement filters?

Thank you,

Michael S

Good morning Mr. S,

The BP600 / AF600 (as well as the other BP PRO series, BP1000 / AF1000, BP2000 / AF2000) are stand alone recirculating systems that have ducting capabilities should you want to use them as a source capture unit.

Understand that a recirculating unit, unlike a source capture unit, will work, but not immediately. The odors need to get to the unit for the unit to remove them. The larger the system (or number of multiple units), the higher the number of the air changes per hour and the quicker this happens in cleaning the air of particulates and odor.

  • High dust and odor removal, filtration capabilities
  • Attractive, compact and portable
  • Extremely quiet, 56 dBA
  • Does not require ductwork eliminating installation costs
  • Ducting capabilities if needed
  • Unique, maintenance friendly design, filters can be changed in minutes
  • Filter flexibility allows for multi-purpose use – mix and match to suit and configure to your needs and application (see below)
  • UV Light (Ultra-Violet “U” Bulb) Upgrade / Option
  • Digital controls
  • Audible and Visual alarms
  • Caster mounted
  • Fine dust particulate removal capabilities
  • Larger dust particulate removal capabilities
  • Light odor chemical gas control removal capabilities
  • Heavy odor chemical gas control removal capabilities
  • Plug and play

BP-600  series for up to approx. 350-400 sq.ft.(<36m2 ) ceiling height 8 – 10 ft
BP-1000 series for up to approx. 500-600 sq.ft .(<56m2 ) ceiling height 8 – 10 ft
BP-2000 series for up to approx. 1000-1200 sq.ft. .(<111m2 ) ceiling height 8 – 10 ft

HOW OFTEN DO I HAVE TO CHANGE MY FILTERS?

For filter life each application is completely different.It depends on the materials you are working with, and how often you are creating particulate.  For instance in Laser applications the depth you are cutting / engraving, the laser wattage, the type of material you are working with are all factors. Typical applications have the pre-filter being changed approximately every 1-3 months, HEPA filter 6-12 months, chemical filter 6-12 months.  This is just a guide as some end users last much longer and some also consume the filters much quicker.

Contact us for help in choosing the right air filtration solution for your needs.

 

01.04.14
by

Air Filtration Odor Removal Reduction 3D Printers ABS Plastic Filament

Air Filtration Odor Removal Reduction 3D Printers ABS Plastic Filament

Client writes:

Hello L,

Attached the rough sketch of the space we want to filter. The space actually only about 1000 sq ft = with 2 rows of shelves/racks.

The room is occupied with 3D-Printers (on the shelves). The material we use to print is ABS plastic which comes in in filament form. During the printing process, the printer heats the ABS plastic filament to melt (soften) the plastic enough to carry the printing process. In the process of heating the plastic filament, there is odor emitted and that is what we want to filter.

Looking forward to hearing back from you on your recommendation. Thanks

C.H.

VP of Manufacturing AOI , CO

Heavy odor control air filtration - Filter configuration Pro Series air filtration system high dust chemical odor removal ducting recirculating capabilities compact portable

Heavy odor control air filtration – Filter configuration
Pro Series air filtration system high dust chemical odor removal ducting recirculating capabilities compact portable

Hi C,

“Worst case scenario”, all the 3D printers are firing at the same time, producing lots of odors, fumes – a Recirculating air filtration system equipped a chemical gas filter (activated carbon filtration), like our BP PRO Series, will work, but not immediately. The odors need to get to the air filtration unit for the unit to remove the odors and fumes. Therefore larger the system and / or multiple units, will result in a higher number of the air changes per hour and the quicker the air is cleaned, filtered of the odors.

“Worst case scenario” – I recommend two (2) of the BP2002 – this duo will deliver up to 11.9 air changes of air per hour (approx 400 lbs of chemical media filtration).

If the situation isn’t as bad as the “worst case scenario”, two (2) of the BP1004 can be considered as an alternative – this combination will deliver up to 6 air changes of air per hour (approx 200 lbs of chemical media filtration).

If you have a similar situation, odor, chemical fumes, gases removal, reduction issues – please contact us for help in choosing the right air filtration system solution to your needs.

  • In North America – USA and Canada: toll free, 1-800-626-0664
  • Outside of North America: 1-514-421-0658
  • Skype: lito.espinosa
  • Or fill out the contact form below

01.03.14
by

Whole House Furnace Central Air Heating Bypass Air Filtration System

Whole House Furnace Central Air Heating Bypass Air Filtration System

Partial bypass configuration, help eliminate airborne contaminants (dust, pollen, dust mites, allergens, odors, chemical fumes, chemical gases, etc) passing through your HVAC system, and provide clean, filtered air for large spaces or the entire home.

image

Attic / Ceiling Installation – Space saving, efficient air filtration for one or multiple rooms.

Standalone Units – Best results for one room and other smaller areas.

HVAC / Central Air / Central Heating / Furnace Bypass – Clean air for the entire home or office.

Contact us for help in choosing the right air filtration system solution to your needs:

  • toll free (North America- USA and Canada): 1-800-626-0664,
  • outside of North America call 1-514-421-0658,
  • Skype: lito.espinosa
  • fill out the contact form below

 

01.01.14
by

1000 CFM Plus Air Filtration Systems For Dust Odor Removal Applications

1000 CFM Plus Air Filtration Systems For Dust Odor Removal Applications

Multi Mode Air Filtration System: Positive Pressure, Negative Pressure, Recirculating Air

3 modes of use: negative pressure, positive pressure, and recirculating mode

3 modes of use: negative pressure, positive pressure, and recirculating mode

In addition to our new ContractAir Air Filtration System, Air Scrubber, Air Purifier, Air Cleaner – whatever you may wish to call them, our BreathEasy PRO series as well as our BreathEasy Home and Office line can be configured for positive air pressure, negative air pressure modes – depending on the size of space and room.

High dust and odor removal, filtration capabilities Attractive, compact and portable Extremely quiet, 56 dBA Does not require ductwork eliminating installation costs Ducting capabilities if needed Unique, maintenance friendly design, filters can be changed in minutes Filter flexibility allows for multi-purpose use – mix and match to suit and configure to your needs and application

Call us for help in choosing the right air filtration solution to your needs and application, toll free in North America (USA and Canada): 1-800-626-0664, Outside of North America: 1-514-421-0658, Skype: lito.espinosa, OR fill out the Contact Form below.