| Find out more |
Category Archives: Debris Capture
Functional, affordable, articulating extraction arms for your fume, dust extractor
Black articulating flex arm for source capture, dust collector, fume extractor, air filtration system: tapered nozzle, round nozzle, clear capture cone nozzle, table mounted, unit mounted
https://www.airpurifiers-r-us.com/fume-extractor-system-articulating-arms-2.html
Contact us for more info, pricing, ordering, call, toll free in US and Canada, 1-800-626-0664 or fill out and send us the form below:
Clean Air Solutions For PODIATRY / FOOTCARE
Compact Dust Extractor
Model: MEm-217LRK
Portable Dust Extractor
Model: BA-FA11
Contact us for more information, pricing, ordering, etc:
DDS Downdraft Station is capable of removing harmful particles and chemical gases, fumes, odors
Space-Saving Air Purification System with Containment Hood
Powered by a brush-less motor and a multi-stage filtration system, the DDS Downdraft Station is capable of removing harmful particles and gases from the work area and helps you maintain a clean and healthy workplace.
Ideal for a wide range of applications, including chemical fume control, powder & dust removal, solvent vapour control, pharmaceutical powder filling, light grinding, acid gas fumes, anaesthesia gas containment, epoxy fume control, touch-up paint applications or other coatings, and many more.
· 2” Pre-filter, #F007-BX (8-pack)
· 6” HEPA filter (99.995% @ 0.3μm), #F357
SPECIFICATIONS
Air Flow: Nominal 600 CFM
Dimensions: Overall – 46.5 x 24 x 20 in, 150 lbs
(H x W x D) Cabinet – 24 x 29 x 20 in
Voltage: 120V / 60 Hz / 10A
Air Intake: 8.5”x17“ (top grille, downdraft)
Blower Type: Direct Drive, 1/2 HP motor
Contact us for help with product selection, information, price quote, or any other assistance needed:
Fume and Dust Extractor, Air Filtration System Auto Flow Feature
Auto Flow
“AUTOFLOW” is an automatic system pressure compensation system. After setting the minimum speed required to properly evacuate your equipment, the controls will automatically increase the motor speed to compensate for the increased pressure as a result of filters getting dirty or a system blockage until maximum speed is reached. After a filter change, system will automatically decrease the speed to the original set point.
Download PDF Brochure / Specification Sheet – Brushed Type Motor / Blower Version : https://www.airpurifiers-r-us.com/assets/specsheet-sph835.pdf
Contact us for help with product selection, information, pricing, quotation:
Laser Engraving, Cutting, Marking Fume, Dust Extractors, Air Filtration Systems
Effective laser fume extraction is critical to laser systems
Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and active carbon modules.
We offer systems for light-medium duty tabletop systems favoured by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.
SUPPORTED LASER MACHINES
LASER BLUE GEL – ZERO BYPASS TO FUMES
We are proud to introduce our new breakthrough technology. We call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it’s elasticity, it allows zero bypass to any fumes, odors and VOCs. It’s NON toxic and NON porous as well.
- Our most popular model for light and medium duty applications
- Multi-stage filtration system: pre-filter, HEPA and chemical filter
- Up to 50 lbs. (23 kg) of chemical filtration media
- Laser Blue gel seal guarantees ZERO FILTER BYPASS
- Dual high speed turbine for high suction, pressure and airflow
- Enhanced mobility with heavy duty lockable casters
- Whisper quiet operation
- Digital control panel
- Also available: brush-less units and custom filter configurations
Have a look, browse our selection of Laser Fume Dust Extractor Air Filtration Systems
Click here – https://www.airpurifiers-r-us.com/laser-fume-extractor.html
Ask us about our Laser Fume and Dust Extractors, proudly made in North America
Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and / or carbon filter
PF801/PF401 Passive Front Access
Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter. Designed to enhance the performance of the SPH800/SPH400 air purifiers.
Who needs it?
Customers that have heavy dust loadings or any type of “sticky” fumes will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.
What’s inside?
The PF801/PF401 modules contain high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units. (PF801, three bags and PF401, two bags)
How easy is it to change the filters?
Both the standalone and the add-on module, have been redesigned to allow easy front-access to the filter bags for a clean, simple and tool-less replacement. Just open the front-door, remove the old filters and replace them with new ones.
How can I use it?
The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.
Download PDF spec sheet – https://www.airpurifiers-r-us.com/assets/pf401-pf801-pre-filter-modules-v01.pdf
Velocity Series – Dust Collector, Large High Volume Brushless 300 CFM, 400 CFM, 600 CFM
Dust Collector, Large High Volume Brushless 300 CFM, 400 CFM, 600 CFM
Excellent for EVERYTHING: Aluminous oxide, sand, quartz, glass beads, gypsum, die-stone, ceramic alloys, acrylics, resins, etc – Brushless, Bagless, and Maintenance Free Industrial Motor
- Premium power series for universal use
- Excellent for EVERYTHING: Aluminous oxide, sand, quartz, glass beads, gypsum, die-stone, ceramic alloys, acrylics, resins, etc
- “A-Mile-A-Minute High Performance Brushless Dust Collection
- Unique sub-micron dust collection filtration down to 0.3 microns
- “Slide & Glide” Rejuvenating Cartridge Filter System
- Brushless, Bagless, and Maintenance Free Industrial Motor
- No brushes or filter bags to change and replace
- Comprehensive Extended Two Year Warranty Protection
- Pre-Filter Collector & Odor Exhaust Filter upgrade features available
- Available in a configuration with both air intake grill and clean air exhaust grill – optional flex hose collars, 1 x 6″ diameter, 1 x 8″ diameter or 2 x 6″ diameter, 2 x 8″ diameter
- Velocity X4 delivers up to 600 CFM of air moving capability
- Whisper quiet performance, 54dBa
- Available in 120 or 230 volts single phase, 50 or 60 Hz
Call us for help with your product selection or for placing your order
Toll Free: 1-800-626-0664, Outside of North America, Viber & WhatsApp: 1-514-219-0658
Fume Extractors, Dust Collectors, Stand-alone Air Filtration Systems
Click here to visit our site – http://www.airpurifiers-r-us.com
Smart accessories for your Quatro Multi Station Fume Extractors, Dust Collectors
Auto Start Slide Valves
Divert airflow from idle workstations to active ones – Switch dust collector, fume extractor filtration system on/off remotely
· Get more air at your active workstation by diverting it from idle ones
· Start/stop your unit remotely from each workstation
· Connect as many ASVs as needed to one dust collector
· Dust collector will continue to operate as long as one valve is open
· Multiple front/rear collar diameters*: 1.5”, 2″, 2.5″or 3″
· Two series available*: basic (AA413) and with stand (AA433)
AA413
AA433
INCLUDED: 25’ remote cable
OPTIONAL:
· Table/Stand Support Bracket for
AA413 series (#AA423) · 10’ remote cable
· Clamp or bolt ASVs directly to workbench
Dust Collectors – Fume Extractors AutoStart Valves Ready
Contact Us
- Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
- Skype: lito.espinosa, Viber & WhatsApp: 1-514-219-0658
- Outside of North America: 1 (514) 364-5538
Air Filtration Systems, Fume Extractors, Air Purifiers, Dust, Chemical Fumes, Gas, Odor Removal 