Pre-filter module for your laser fume extractor

Are you consuming, replacing your main filters, chemical odor filter, HEPA filter, sooner rather than later?

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later.

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF801/PF401 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

Contact us for more information – go on to our contact tab or send us a completed contact form below:

Passive Pre-Filter Modules, Laser Fume Extractors

PF801/PF401 Passive Front Access

Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter. Designed to enhance the performance of the SPH800/SPH400 air purifiers.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

Who needs it?
Customers that have heavy dust loadings or any type of “sticky” fumes will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

How can I use it?
The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

| More on our Passive Pre-filter Modules for Laser Fume Extractors |

Call us, toll free, 1-800-626-0664, for help with your product selection. You could also send us a completed contact form below:

Laser cutting | Sticky Smoke | Premature clogging

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later 🙂

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Capture-PF400-PF800

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form below.