Laser cutting | Sticky Smoke | Premature clogging

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later 🙂

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Capture-PF400-PF800

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form below.

Advertisements

MedEvac Mini For Podiatry Podiatrists Nail Skin Debris Capture

MedEvac dust, debris extractor, air filtration system for podiatrist / podiatry

Mini Health Smart Portable Dust Extractor – capture nails and skin debris at source

MedEvac Mini For Podiatrist – a multi-purpose tool and air filtration system with superior pulling and filtration credentials.

Excellent in podiatry for:

  • Nail dust
  • Calluses
  • Buffing
  • Cast cutting
  • Corn debris
  • Bunions
  • Sterilizing
  • Warts
  • Grinding
  • Sanding

Capture NAIL & SKIN DEBRIS right at the source, before it migrates throughout the room. Wonderful!! Wonderfully portable and affordable too!! Yes, under $800, and that includes a source capture flex articulating arm- yes indeed!!

Benefits of a proven design:

  • High speed turbine motor blower provides efficient debris removal
  • Casters provide for mobility
  • Ultra quiet, yes, only 49dBA (at high speed, measured at 6 ft away)
  • Easily disposable bag filter surrounded by 99% efficient pleated cartridge filter ensures 100% capture of all harmful debris
  • Compact, space saving design
  • Includes flexible source capture arm to capture up to 43″ in height (12″ away from the unit)

Deluxe Model is also available, similar to above, but also includes:

  • Variable speed control
  • Microprocessor controls automatically alert you when to maintain filters & motor
  • ALSO available – Remote ON/OFF Foot Pedal (PN: AA114)

Contact us for help with your product selection or for help with placing your order– All units are factory fresh – shipped direct from the factory to your door.

TOLL FREE : 1-800-626-0664 or fill out the contact form below.

Heavy Duty Fume Dust Extractor Air Filtration System

Designed for heavy duty laser fume dust chemical fumes applications

Check it out: http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

CSA600 Heavy Duty Laser Fumes Dust Odor Extractor Air Filtration System

  • Multi-stage fitration system: filter bag (or high capacity pleated filter),
    medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

SPL400 Laser Fume Extractor For Small Operations

SPL400 Laser Fume Extractor For Small Operations

  • Ideal for low debris generating applications like metal marking
  • Medium pressure motorized brushless impeller motor blower, 300 CFM, 120V or 230V
  • Enhanced mobility with heavy duty lockable casters (wheels)
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation, 54 dBA at full speed
  • Optional digital control panel

Laser Fume Extractor | Soldering Fume Extractor | Dust Particulate Extractor

Call for help with your product selection or for help with placing your order.

Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

  • Rapidly becoming the standard for small engravers the JetStream offers significant advantages and performance over the competition
  • Maximum airflow 110 CFM with a maximum pressure of 90″ W.C.
  • 1 micron pre-filter bag, easily replaced
  • Built in silencer reduces noise to 49 dBA
  • Sleek, modern and easily portable
  • Full range speed control
  • CSA/UL approved motors with circuit breaker and thermal cut-out protection
  • Remote on-off communication
  • Optional 6 Gallon (26 l)Knock out bucket for larger debris
Jetstream - Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

 Call for help with your product selection – 1-800-626-0664 or fill out the Contact Form below.

Quatro Air Replacement Spare Filters Parts

2" Activated Carbon- Chemical gas filter

2″ Activated Carbon- Chemical gas filter

Hey, just want to let you know, if you need help with spare filters, replacement filters – bag filters, pre-filters, HEPA filters, Chemical Gas Media filters or Activated Charcoal filters, Bulk activated carbon, chemical gas media, and others, please contact us at 1-800-626-0664 or fill out the form below.

We even have spare filters you can use with the Electrocorp AirRhino air filtration system.

If you need bulk activated charcoal for your refillable activated charcoal filter canister we can supply you – 26 different blends for those special applications.

replacement filters for quatro air csa-600 fume extractor air filtration system

Customer inquiry regarding replacement (spare) filters for their CSA-600 fume extractor:

We have a Quatro CSA-600i Series Unit and we need  F128 filters, F074 Hepa Filter and F073 Filter. If you do have them, we need to get a quote. Thank You

Yes, we can help with replacement filters and parts.

Standard filter sequence supplied with the CSA-600:

Capture_CSA600_Filters

  1. Anti-microbial multi-layered high capacity bag filter
  2. High capacity pleated 60% ASHRAE rated secondary filter
  3. 99.97% on .3 microns, certified medical grade HEPA filter
  4. 15” deep general purpose chemical filter module (refillable  – activated charcoal / carbon module)

Prices below (subject to change without prior notice):

Capture_CSA600_Filter_Prices

Contact us for help with your replacement filters