Laser cutting | Sticky Smoke | Premature clogging

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later 🙂

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Capture-PF400-PF800

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form below.

Advertisements

Laser Cutting | Delrin

Laser cutting Delrin

DuPont™ Delrin® acetal homopolymer resin is a highly-crystalline engineering thermoplastic.

Our Laser Fume Extractors generally come with deep bed chemical filtration (we have one that’s 8” deep, one that’s 15” deep) loaded with our general purpose chemical media blend. For most applications the general purpose blend would suffice.

If you’re cutting materials such as Delrin you will most likely require a special combination of chemical filtration with a mix of chemical media blend to be effective in dealing with the fumes produced in the process of cutting Delrin.

We suggest you let us know what materials you work with in order for us to provide you the best recommendation for your air filtration, fume extraction needs.

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and deep bed activated carbon modules.

cover-laser-brochure

Laser Fume Extractors | Air Filtration Systems | High Pressure | High Speed Turbine Motor / Blowers

Contact Us for help with your product selection:

  • Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
  • Fax: 1-514-651-3995
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 364-5538

Laser Fume Extractor for your Universal Laser Machine

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and active carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Contact us for help with your product selection.

Heavy Duty Fume Dust Extractor Air Filtration System

Designed for heavy duty laser fume dust chemical fumes applications

Check it out: http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

CSA600 Heavy Duty Laser Fumes Dust Odor Extractor Air Filtration System

  • Multi-stage fitration system: filter bag (or high capacity pleated filter),
    medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

CSA600 Heavy Duty High Pressure Laser Fume Extractors

CSA600 Heavy Duty High Pressure Laser Fume Extractor System

Designed for heavy duty laser fume dust chemical fumes applications

  • Multi-stage filtration system: filter bag (or high capacity pleated filter),
  • medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

Contact us for help with your product selection. Call toll free, 1-800-626-0664 or fill out the contact form below.

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

The units are shipped, standard feature, with a 4” diameter, 6 foot long heavy duty flex hose. Optional smaller hose collar diameters are available: 3”, 2.5”.

You may want to order your unit or units with a matching flex arm or articulating arm – here are your options:

image

image

image

Contact us for help in choosing the right Laser Fume Dust Extractor System for your needs.

Contact Us

  1. Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
  2. Skype: lito.espinosa
  3. Outside of North America: 1 (514) 421-0658
  4. Contact Us Form – Click on this link to send us message
  5. Or use the contact form below – we’ll respond to your inquiry the same day

Air Filtration Air Cleaner for fumes fumes and more fumes

Air Filtration Air Cleaner for fumes fumes and more fumes

Fumes, fumes, fumes, odors, chemical gases – not good for you, for your lungs, for your health – no, not good.

However way, wherever they are produced and generated, be it in a Nail Salon, Spa, Hair Salon, Soldering station, cutting acrylic, plastic, wood, etc with a laser cutting, laser engraving machine, fumes, chemical fumes, chemical gases you can do without.

The Quatro Air SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

The Quatro Air SPH400 is a good acrylic fume, odor, extractor, air filtration system, air cleaner – it has very good air drawing, air pulling, capability and capacity, extracting from close to the source, owing to its high speed motor that could stand up to 90″ WC static pressure.

It even comes, as an option, with a dual air intake collar for a couple of flex hose or articulating hoses to attach to them. Great in a scenario where there are two nail acrylic application table along side each other – the SPH400 can be positioned in between the two tables – one (1) fume extractor air filtration system doing the work for two tables or stations.

The SPH400 comes with an impressive list of features.

Protect and care for the health and well being of your nail tech as well as your customer by reducing their exposure to these harmful to health chemical fumes and gases.

  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications
  • We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!

Contact us for help in choosing the right fume, odor, dust extraction air filtration system for your needs.

Call toll free in North America, 1-800-626-0664. Outside of North America, call 1-514-421-0658, or Skype: lito.espinosa. You may also use the contact form below.