Laser Fume Extractor System for Cutting MDF With A Trotec SP500 Laser Machine

We’re cutting MDF 8 hours a day, 6 days a week

Hi Lito. We’re cutting MDF 8 hours a day, 6 days a week. Both machines are cutting the same thing.  MDF is 95% of the work.
Currently all the cars in the parking lot get a thin film of wood dust in them after a few days.
Currently the extractors push the air outside. I believe that mdf and hardboard release fumes that are potentially carcinogenic,  so that’s the biggest reason for the filtration requirement.
We usually pair our SPH800 series with the SP500. They come in a Brushed Type version and a Brushless motor version. If you will be running the units continuously, 7 – 8 hours a day, 5 days a week, I suggest the Brushless system. 
If you’re working with materials that produces “sticky fumes”, “sticky smoke”, I highly recommend that you invest in the Pre-filter Module, the PF801A. 

Brush Type Systems, SPH835 (230 v) , c/w: (2) AG168 knock out pad, (2) F071 pre-filter, (2) F074 HEPA filters , (2) AG097 general purpose chemical filter. Brushless Systems, SPH82B5 (230V Only), c/w:(2) AG168 knock out pad, (2) F071 pre-filter , (2) F074 HEPA filters , (2) AG097 general purpose chemical filter. PF801A, Add on pre-filter section designed to fit SPH800 casing, incl (3) F128 bags.


Contact  us for help with your Laser Fume Extraction needs

Contact  us for help with your Laser Fume Extraction needs, we can assist you with your product selection. Call, Toll Free (North America): 1-800-626-0664 | Overseas: 1-514-364-5538 | Skype: | Viber & WhatsApp: 1-514-219-0658


Multi-Station Soldering Fume Extractor Air Filtration System

 Multi-station solder fume extractor and air filtration system
  • Heavy gauge welded Steel Construction
  • Powder coated standard Quatro white
  • Standard inlet dual 3” (75 mm) diameter hose collars, optional
  • 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 4”(100mm)
  • (10) table mounted arms part # AA116 complete with tapered nozzles, table brackets and individual blast gates for air balancing
  • Main manifold piping by others
  • Discharge grills located underneath system
  • Maximum Airflow 534 CFM
  • Maximum static pressure capability 44” WC.
  • Whisper quiet operation
  • (2) CSA / UL approved 1100 Watt brushless type blowers(Brushed type motor / blower also available)
  • Model SPH-82B5, 230 volt ONLY single phase, 12 amps
  • Blowers are complete with thermal cut-outs
  • 6’ (2 meter) electrical cord set
  • Digital Control Panel:
    Manual on/off switch
    subD 9 pin interface for auto On/Off
    Resettable circuit breaker protection
    Speed control
    Auto-flow (automatically speeds up as filters get dirty)
    Pressure sensor monitoring filter status
    Audible alarms for filter and motor status
    Visual lights for operation, filter and motor status
  • Easy tool less filter change out
  • 3’ (1 meter)of heavy duty industrial hose per capture arm
  • Limited one year warranty
  • Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
  • Approximate operating weight is 150 lbs (68 kg)
Contact us for help with your product selection, toll free at 1-800-626-0664 or fill out the contact form on this page.
Thank you and Happy Soldering!! 🙂

Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

  • Rapidly becoming the standard for small engravers the JetStream offers significant advantages and performance over the competition
  • Maximum airflow 110 CFM with a maximum pressure of 90″ W.C.
  • 1 micron pre-filter bag, easily replaced
  • Built in silencer reduces noise to 49 dBA
  • Sleek, modern and easily portable
  • Full range speed control
  • CSA/UL approved motors with circuit breaker and thermal cut-out protection
  • Remote on-off communication
  • Optional 6 Gallon (26 l)Knock out bucket for larger debris
Jetstream - Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

 Call for help with your product selection – 1-800-626-0664 or fill out the Contact Form below.

Hospital Healthcare Medical Air Filtration Air Scrubber

Isolation Rooms

Subsequent to helping contain the SARS outbreak in Canada and China in 2004, Quatro began working closely with the Canadian and Quebec Government Department of Health, in conjunction with CDC Guidelines, to develop a more specific system to address this type of emergency. The main scope of the project was quite clear: to design a system that allows any facility to convert ordinary patient rooms into isolation environments in minutes. Secondary goals included automatic control of negative room pressure, complete & guaranteed sealing to ensure zero by-pass around filters, portability, noise levels below 54 dBA and the ease of installation of system/HEPA cartridge filters. Each of these goals was treated as a separate project with various groups focusing on a specific task to create a hospital friendly system. Beta tests were conducted in hospital environments to receive feedback from microbiologists, facilities engineers, politicians, design engineers, building and hospital planners and, especially, nurses who will be working closely to deploy and maintain these systems.

The Medical Industry

Whether your needs are Patient Isolation, General Purification, Particulate/Odor Source Capture, or Dust Collection, a QUATRO environmental air purifier will make a noticeable difference. QUATRO has designed a wide range of units geared towards the medical profession. Targeting a host of harmful germs, viruses, bacteria, micro-organisms, chemicals and odors, QUATRO’s medical grade HEPA filters, highly adsorbent gas-phase chemical filters and/or germicidal UV lights work collectively to provide a truly hygienic environment.

Given the H1N1 virus currently on everyone’s mind it is no surprise to see hand sanitizer everywhere; at schools, the office and many public places.

With the SARS outbreak of 2003 hundreds of the  Quatro Air “Medic-Air” series sold around the world and have  been selling ever since to health care facilities in preparedness for the next airborne virus.  As with the hand sanitizer; it only makes sense to be prepared to contain the next pandemic.

With true medically certified HEPA filters and UVGI lights to kill bacteria the Medic-Air series will help ensure your patients’ health and safety as well as your healthcare facility staff.  We have units geared for waiting rooms, clinics, isolation rooms etc. Talk to one of our specialists today to determine which Medic-Air unit best suits your needs.

(Examination room, Waiting room, IVF In Vitro Fertility Lab VOCs)


Positive-Negative Pressure Environments
Odor and/or Debris Capture
Micro-Environmental Filtration

Click here for more info