Not your ordinary Fume Extractor

SPH400 Series fume extractors for light & medium duty

Laser Engraving, Laser Cutting, Laser Marking, Soldering Fumes and more

Dual high speed turbine for high suction, high pressure and high airflow. Allows the fume extractor to move contaminated air through 12 inches of filtration stages

Features

  • Our most popular model for light and medium duty applications3dprinting_sph400_filters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Up to 50 lbs. (23 kg) of chemical filtration media
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Enhanced mobility with heavy duty lockable casters
  • Whisper quiet operation
  • Digital control panel
  • Also available: brushless units and custom filter configurations

Specifications

  • Air Flow: 0-482 m³/h / 0-280 CFM
  • Max Pressure: 90” W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 12″W x 15″D x 24″H / 304mm x 381mm x 762mm
  • Filter Sequence: Multi layered knock-out pad (F166-125), Pleated pre-filter, 30% ASHRAE rated (F071), 2” Medical grade HEPA filter 99.97% (F074), 8“ Chemical filter (AG097)
  • Optional lnlets: 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side collars for venting to the exterior
  • Sound Level: 62 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Webpage link: Fume Extractor (Dust), Laser Cutting, Laser Marking, Laser Engraving, Soldering Fumes

Call us for help with placing your order or for more information, toll free in North America, 1-800-626-0664.

You may also complete and send the contact form below, we’ll get back to you the same day:

 

 

Advertisements

SPH400, SPH426, Not Your Ordinary Laser Fume Extractor, Air Filtration System

Our most popular model Laser Fume Extractor for light and medium duty applications

The SPH400 series Laser Fume Extractor, Air Filtration System, is our most popular model for light and medium duty applications. It’s made here in North America, in Pointe-Claire, Quebec, Canada but has found its way to shops, labs, offices, workplaces around the world.

Here’s why.

4 stages, multi-stages of filtration

Capture-PF400-PF800

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

Same type of filter that is used in hospital operating rooms

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

Odors, Fumes – gas phase filter is quite large and 8” deep

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

Ideal at removing many VOC’s

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

A gel seal material to guarantee zero by-pass

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

High pressure blowers to overcome the resistance created by the deep bed chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

For more information, visit our webpage at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html or contact us using the contact form below.

Laser Cutting | Delrin

Laser cutting Delrin

DuPont™ Delrin® acetal homopolymer resin is a highly-crystalline engineering thermoplastic.

Our Laser Fume Extractors generally come with deep bed chemical filtration (we have one that’s 8” deep, one that’s 15” deep) loaded with our general purpose chemical media blend. For most applications the general purpose blend would suffice.

If you’re cutting materials such as Delrin you will most likely require a special combination of chemical filtration with a mix of chemical media blend to be effective in dealing with the fumes produced in the process of cutting Delrin.

We suggest you let us know what materials you work with in order for us to provide you the best recommendation for your air filtration, fume extraction needs.

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and deep bed activated carbon modules.

cover-laser-brochure

Laser Fume Extractors | Air Filtration Systems | High Pressure | High Speed Turbine Motor / Blowers

Contact Us for help with your product selection:

  • Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
  • Fax: 1-514-651-3995
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 364-5538

Heavy Duty Fume Dust Extractor Air Filtration System

Designed for heavy duty laser fume dust chemical fumes applications

Check it out: http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

CSA600 Heavy Duty Laser Fumes Dust Odor Extractor Air Filtration System

  • Multi-stage fitration system: filter bag (or high capacity pleated filter),
    medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

SPL400 Laser Fume Extractor For Small Operations

SPL400 Laser Fume Extractor For Small Operations

  • Ideal for low debris generating applications like metal marking
  • Medium pressure motorized brushless impeller motor blower, 300 CFM, 120V or 230V
  • Enhanced mobility with heavy duty lockable casters (wheels)
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation, 54 dBA at full speed
  • Optional digital control panel

Laser Fume Extractor | Soldering Fume Extractor | Dust Particulate Extractor

Call for help with your product selection or for help with placing your order.

Laser Fume Extractor | Morntech (MT- L1290)

A prospective client, who we happily supplied with the matching air filtration system / Laser Fume, Laser Cutting, Laser Engraving Dust, Odor, Fume Extractor system, initially wrote:

Hello,

I contacted you via phone earlier today regarding an air filtration system. According to the head of our tech department this should be compatible with the Morntech (MT- L1290) that we have ordered. The specifications are listed in the right column of the chart below.

Thanks,

Tracy L

Our SPH-426 (SPH-400 series) was the perfect match for their Morntech (MT- L1290) laser cutting, laser engraving machine. Just to mention other brands of Laser cutters, Laser markers, Laser engravers- we’ve matched our Laser Fume, Dust, Odor Extractors with:

List of supported lasers

Laser and Laser Marking

SPH-400 – Multi Purpose Filtration Station

Description

  • Our most popular unit for small to medium duty laser applications
  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications
  • We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended

SPH400-2.png (115228 bytes) SPH400-3.png (182238 bytes) adj_ext_arm_02.JPG (14999 bytes) adj_ext_arm_01.JPG (26274 bytes) extraction_arm.JPG (51083 bytes) iseries_ctl_pnl.JPG (99352 bytes)

For help in choosing the right clean air solution for your needs –  Call us, toll free: 1-800-626-0664 (Most of USA and Canada), +1-514-421-0658 (outside of North America), Skype: lito.espinosa or fill out the Contact Form below.

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

The units are shipped, standard feature, with a 4” diameter, 6 foot long heavy duty flex hose. Optional smaller hose collar diameters are available: 3”, 2.5”.

You may want to order your unit or units with a matching flex arm or articulating arm – here are your options:

image

image

image

Contact us for help in choosing the right Laser Fume Dust Extractor System for your needs.

Contact Us

  1. Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
  2. Skype: lito.espinosa
  3. Outside of North America: 1 (514) 421-0658
  4. Contact Us Form – Click on this link to send us message
  5. Or use the contact form below – we’ll respond to your inquiry the same day