Smart accessories for your Quatro Multi Station Fume Extractors, Dust Collectors

Auto Start Slide Valves

Divert airflow from idle workstations to active ones – Switch dust collector, fume extractor filtration system on/off remotely

1F19E5A1-4C1D-4CD3-908A-FB35EB135409

· Get more air at your active workstation by diverting it from idle ones
· Start/stop your unit remotely from each workstation
· Connect as many ASVs as needed to one dust collector
· Dust collector will continue to operate as long as one valve is open
· Multiple front/rear collar diameters*: 1.5”, 2″, 2.5″or 3″
· Two series available*: basic (AA413) and with stand (AA433)
AA413
AA433
INCLUDED: 25’ remote cable
OPTIONAL:
· Table/Stand Support Bracket for
AA413 series (#AA423) · 10’ remote cable
· Clamp or bolt ASVs directly to workbench

Dust Collectors – Fume Extractors AutoStart Valves Ready

01BFD2B3-8A54-4A4B-ABD1-7E6157172C90

Contact Us

Meet Our Desktop Containment System or Simply DCS

IDEAL FOR SINGLE STATION FILTRATION OF SOLDER FUMES

4CEF0AD8-8075-4D37-8F29-D94C6FBEFB76

Desktop Containment System, or simply DCS – ideal for single station filtration of solder fumes (#soldering #solderfumes #fumeextractor #fumeextraction )

Protects operators from harmful chemicals, vapors and particulates

Protects operators from harmful chemicals, vapors and particulates, Illuminated interior provides a clear and bright work environment, Quiet operation, digital control panel with audible and visual alarms, Standard filter sequence: pre-filter, chemical filter and HEPA filter, Custom filter sequences available for custom applications, Adjustable hinged acrylic front door allows for great visibility.

| More on the Desktop Containment System- DCS single station solder fume filtration |

Contact Us

SPH800 Multi-Station SOLDER FUME EXTRACTOR FOR HIGH VOLUME APPLICATIONS

SPH800 with 10 Soldering Stations

SPH800 with 10 Soldering Stations

  • Cost-effective high pressure system
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Whisper quiet operation
  • Enhanced mobility with heavy duty lockable casters
  • Powered by 3 high-speed turbines (CSA/UL approved)
  • Digital control panel
  • Up to 100 lbs. (45 kg) of chemical filtration media
  • Also available: brushless units and custom filter configuration

Contact us toll free from anywhere in North America, 1-800-626-0664, or send us a completed contact form at – https://cleanairsolution.wordpress.com/contact-us/

Quatro Air Technologies MULTI-USER SOLDER FUME EXTRACTOR Model # SPM504

Multi-station soldering fume extractor configuration with optional capture arms

Multi-station, multi-user, soldering fume extractor system – up to four (4) users

  • Ideal for up to 4 workstations
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Multi-station configuration with optional capture arms: AA006 (unit mount) and AA062 (table mount) – see above photo.

Call us for more information, toll free anywhere in North America, 1-800-626-0664 or go to our contact page and send us the completed Contact Form.

Happy Soldering!! 👍😊

Not your ordinary Fume Extractor

SPH400 Series fume extractors for light & medium duty

Laser Engraving, Laser Cutting, Laser Marking, Soldering Fumes and more

Dual high speed turbine for high suction, high pressure and high airflow. Allows the fume extractor to move contaminated air through 12 inches of filtration stages

Features

  • Our most popular model for light and medium duty applications3dprinting_sph400_filters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Up to 50 lbs. (23 kg) of chemical filtration media
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Enhanced mobility with heavy duty lockable casters
  • Whisper quiet operation
  • Digital control panel
  • Also available: brushless units and custom filter configurations

Specifications

  • Air Flow: 0-482 m³/h / 0-280 CFM
  • Max Pressure: 90” W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 12″W x 15″D x 24″H / 304mm x 381mm x 762mm
  • Filter Sequence: Multi layered knock-out pad (F166-125), Pleated pre-filter, 30% ASHRAE rated (F071), 2” Medical grade HEPA filter 99.97% (F074), 8“ Chemical filter (AG097)
  • Optional lnlets: 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side collars for venting to the exterior
  • Sound Level: 62 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Webpage link: Fume Extractor (Dust), Laser Cutting, Laser Marking, Laser Engraving, Soldering Fumes

Call us for help with placing your order or for more information, toll free in North America, 1-800-626-0664.

You may also complete and send the contact form below, we’ll get back to you the same day:

 

 

Multi-Station Soldering Fume Extractor Air Filtration System

 Multi-station solder fume extractor and air filtration system
  • Heavy gauge welded Steel Construction
  • Powder coated standard Quatro white
  • Standard inlet dual 3” (75 mm) diameter hose collars, optional
  • 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 4”(100mm)
  • (10) table mounted arms part # AA116 complete with tapered nozzles, table brackets and individual blast gates for air balancing
  • Main manifold piping by others
  • Discharge grills located underneath system
  • Maximum Airflow 534 CFM
  • Maximum static pressure capability 44” WC.
  • Whisper quiet operation
  • (2) CSA / UL approved 1100 Watt brushless type blowers(Brushed type motor / blower also available)
  • Model SPH-82B5, 230 volt ONLY single phase, 12 amps
  • Blowers are complete with thermal cut-outs
  • 6’ (2 meter) electrical cord set
  • Digital Control Panel:
    Manual on/off switch
    subD 9 pin interface for auto On/Off
    Resettable circuit breaker protection
    Speed control
    Auto-flow (automatically speeds up as filters get dirty)
    Pressure sensor monitoring filter status
    Audible alarms for filter and motor status
    Visual lights for operation, filter and motor status
  • Easy tool less filter change out
  • 3’ (1 meter)of heavy duty industrial hose per capture arm
  • Limited one year warranty
  • Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
  • Approximate operating weight is 150 lbs (68 kg)
Contact us for help with your product selection, toll free at 1-800-626-0664 or fill out the contact form on this page.
Thank you and Happy Soldering!! 🙂

Laser Fume Extractor For Small Operation | Hobbyists | Metal Marking

Laser Fume Extractor For Small Operation | Hobbyists | Metal Marking

Ideal for low debris generating applications like metal marking
Medium pressure motorized brushless impeller motor blower, 300 CFM, 120V or 230V
Enhanced mobility with heavy duty lockable casters (wheels)
Multi-stage filtration system: pre-filter, HEPA and chemical filter
Whisper quiet operation, 54 dBA at full speed
Optional digital control panel

Laser Fume Extractor – SPL400 – ideal for small operations like Metal Marking

JUST SOME OF THE SUPPORTED POPULAR BRAND LASER MACHINES

Contact us for help with your product selection – toll free North America – 1-800-626-0664

Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single Quatro SPH-426 high pressure filter system.

Systems comes complete with patent pending Laser Blue Gel Seal ensuring zero by-pass for any toxic fumes.

Each system comes complete with initial set of filters including a 30% ASHRAE rated pre-filter, 99.97% certified medical grade HEPA filter, and an 8 inch deep bed chemical filter.

The microprocessor control panel is complete with visual and audible alarms, digital speed control, the ability to be interlocked for remote on/off, auto flow adjusts speed of blowers as filters get dirty.

Available accessories include snap together ducting / piping, industrial heavy duty hose, and table mounted extraction arms with damper control and various nozzle attachments.

SPH426 Series High Pressure, High Suction Solder Fume Extractor, Air Filtration System

Call us for help with your product selection – toll free: 1-800-626-0664

You may also fill in the Contact Form below – we will get back to you soon as possible

Quatro Air SPH-82B5 Brushless laser solder odor fume extraction system

Dust, particle, odor, chemical fumes, smoke air filtration, source capture applications

We are pleased to offer the following SPH-800 series laser fume extraction system for your air filtration application as described below:

image

SPH-800 Series  Fume Extractor Specifications:

•   Heavy gage welded Steel Construction
•   Powder coated standard Quatro white
• Standard inlet dual 4” (100 mm) diameter hose collars, optional single
or dual 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 3”(75mm)
•   Discharge grills located underneath system
•   Maximum Airflow 534 CFM (252 l/sec)
•   Maximum static pressure capability 44”w.c. (11 KPa)
•   Whisper quiet operation 54 dBA
•   (2) CSA/UL approved 1100 Watt brushless type blowers
•   Model SPH-82B5, 230 volt ONLY single phase, 12 amps
•   Blowers are complete with thermal cut-outs
•   6’ (2 meter) electrical cord set

Filter sequence supplied with system:

o (2) Multi layered dual inlet knock out pad
o (2) 30% ASHRAE rated pleated filter
o (2) 99.97% on 0.3 microns certified medical grade HEPA filter
o (2) 8” deep general purpose chemical filter module

image

•   Easy tool less filter change out
•   6’ (2 meters)of heavy duty industrial hose
•   Limited one year warranty
•   Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
•   Approximate operating weight is 150 lbs (68 kg)

Contact Us

  • Toll Free:
    1-888-395-0330 or
    1-800-626-0664 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 421-0658

Air Filtration System | Source Capture | Solder Fume Extractor |Nano Rework Station |

Solder fume extractor | Flex Articulating Arm | for Source Capture

Nano rework station, meet your friend and partner, our

SolderPure Fume Extractor | Air Filtration System. 🙂

Yes, it comes with a flex articulating arm- optional table mounted arm, digital control panel, a particulate pre-filter, a true HEPA filter, and an Activated carbon, chemical gas phase filter.

  • Capture SOLDER SMOKE & FUMES at source, before they migrate throughout the room
  • Ideal for: SOLDER FUMES, FLUX, WAXING FUMES, SOLVENT VAPORS and RHODIUM
  • Extremely quiet (52 dBA)
  • Optional Foot-pedal simplifies operation (PN: H181-Universal, or PN: H251-deluxe soft-touch)
  • Multi-Flex Arm included
  • Cyanide removal also available
  • PDF spec sheet

Contact Us