Not your ordinary Fume Extractor

SPH400 Series fume extractors for light & medium duty

Laser Engraving, Laser Cutting, Laser Marking, Soldering Fumes and more

Dual high speed turbine for high suction, high pressure and high airflow. Allows the fume extractor to move contaminated air through 12 inches of filtration stages

Features

  • Our most popular model for light and medium duty applications3dprinting_sph400_filters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Up to 50 lbs. (23 kg) of chemical filtration media
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Enhanced mobility with heavy duty lockable casters
  • Whisper quiet operation
  • Digital control panel
  • Also available: brushless units and custom filter configurations

Specifications

  • Air Flow: 0-482 m³/h / 0-280 CFM
  • Max Pressure: 90” W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 12″W x 15″D x 24″H / 304mm x 381mm x 762mm
  • Filter Sequence: Multi layered knock-out pad (F166-125), Pleated pre-filter, 30% ASHRAE rated (F071), 2” Medical grade HEPA filter 99.97% (F074), 8“ Chemical filter (AG097)
  • Optional lnlets: 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side collars for venting to the exterior
  • Sound Level: 62 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Webpage link: Fume Extractor (Dust), Laser Cutting, Laser Marking, Laser Engraving, Soldering Fumes

Call us for help with placing your order or for more information, toll free in North America, 1-800-626-0664.

You may also complete and send the contact form below, we’ll get back to you the same day:

 

 

Advertisements

SPH400, SPH426, Not Your Ordinary Laser Fume Extractor, Air Filtration System

Our most popular model Laser Fume Extractor for light and medium duty applications

The SPH400 series Laser Fume Extractor, Air Filtration System, is our most popular model for light and medium duty applications. It’s made here in North America, in Pointe-Claire, Quebec, Canada but has found its way to shops, labs, offices, workplaces around the world.

Here’s why.

4 stages, multi-stages of filtration

Capture-PF400-PF800

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

Same type of filter that is used in hospital operating rooms

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

Odors, Fumes – gas phase filter is quite large and 8” deep

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

Ideal at removing many VOC’s

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

A gel seal material to guarantee zero by-pass

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

High pressure blowers to overcome the resistance created by the deep bed chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

For more information, visit our webpage at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html or contact us using the contact form below.

Extract fumes from injection molding machines

R.H. wrote to inquire about our fume extractors for use when purging their injection molding machine – issue with smoke and odor:

We would only open the exhaust when purging the machine, so I only envision one machine needing extraction at a time.  We never run more than four machines total, so worst case scenario, we’d need to extract from four.  I envision having flexible ducting to each machine, with a open/closeable vent at each machine above the nozzle.  If that isn’t feasible, I would see if there is a way we could fabricate an enclosure around the nozzle.  As far as the manifold goes, I envision something very much like the one pictured in your brochure with the ten stations (an 8-10 ft. section of pvc with ports coming off of it), the only difference, is the flexible hose (duct hose) would be longer than what is pictured.

After going back and forth discussing various options, we have decided to go with the CSA626 Fume Extractor with a modified filter sequence incorporating a 20″ chemical filter section.

R.H writes back, after the unit was delivered and put to use:

I just put the fume extractor to use for the first time; on a machine/material that has known to “smoke out” the building…let me say, I am thoroughly impressed with the performance of the unit.  I have to admit, I was somewhat skeptical when you stated that it would remove the smell as well, but sure enough, it’s performing just like you said it would.  It looks as though  all of the research/questions have resulted in receiving a great product…thanks!

Best Regards,

R

CSA-600 - Heavy Duty Dust & Odor Removal

The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Call us toll free, 1-800-626-0664, for help with your product selection, or use the contact form below.

 

Capturing and filtering chemical odors, gases

You will need an air filtration system with a source capture arm, a deep bed chemical odor filter, 8 inches, 15 inches or more in depth, possibly a HEPA filter (for removing smoke haze), a unit powered by a high speed, high pressure motor blower to overcome the static pressure of pulling contaminated air quickly from the source and through a mutli-stage filtration (that includes a deep bed chemical, odor, gas filter).

Our Fume Extractors can help you clean the air in your workshop.

For example, our CSA 600 series comes with these neat features:

 

  • Multi-stage filtration system: filter bag (or high capacity pleated filter), medical grade HEPA and chemical filter

    CSA-600 - Heavy Duty Dust & Odor Removal

    The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

  • Refillable, 15” deep chemical filter module, up to 66 lbs. (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

Check out the specs on our CSA600 series fume extractor:

  • Air Flow: 0-480 m³/h / 0-282 CFM
  • Max Pressure: 90″ W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 13″W x 21″D x 45″H / 330mm x 533mm x 1143mm
  • Filter Sequence: Antimicrobial high capacity bag filter (F128), 6″ Pleated filter, 60% ASHRAE rated (F073), 2” Medical grade HEPA Filter 99.97% (F074), 15“ Chemical filter (AG111)
  • Optional lnlets: 1.5”, 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side discharge collars for venting to the exterior
  • Sound Level: 52 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose and clamps

Visit our fume extractor web page at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html.

For our other air filtration systems that could be of help to you with regards to chemical, odor, gas, control, filtration, purification, point your browser to http://www.airpurifiers-r-us.com/index.html

Feel free to reach to us by calling toll free, 1-800-626-0664, outside of North America, 1-514-364-5538, Skype: lito.espinosa, or use the contact form below.

 

Fume Extractor, Light Duty, Multi-station, multi-user configuration with optional capture arms

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller, Enhanced mobility with heavy duty lockable casters, Multi-stage filtration system: pre-filter, HEPA and chemical filter, Whisper quiet operation,  Optional digital control panel

  • Air Flow: 1100 m³/h / 475 CFM
  • Motor/fan: Backward inclined, non-overloading, brushless
  • Voltage: 120V or 230V
  • Dimensions: 15″W x 23″D x 30″H / 381mm x 585mm x 762mm
  • Filter Sequence: Pleated pre-filter, 30% ASHRAE (F265), Medical grade HEPA Filter 99.97% (F057), Chemical filter (F033-GPC)
  • Optional lnlets: 2×3”, 3×3” or 4×3″
  • Discharge: Recirculation grille; optional silencer (H250]
  • Sound Level: 62 dBA at full speed
  • Remote Control: Optional
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps
soldering-spm504

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller

Kindly contact us for help with your product selection, pricing, and / or help with ordering, Toll free: 1-800-626-0664.

You may also use the contact form on this page. Have a wonderful day!! 🙂

Single Station Solder Fume Extractor

Meet our DCS (Desktop Containment System)

People can become permanently sensitized to solder fumes. As a result continued exposure may cause asthma and other respiratory health issues depending on the amount of exposure. Employees should be protected from these health risks by using the best fume extraction systems available.

Possible health symptoms due to soldering smoke

headaches, fatigue, irritability, constipation, nausea, stomach pains, amnesia, dizziness, loss of weight

Continued uncontrolled exposure could cause far more serious symptoms such as: kidney damage, nerve and brain damage, cancer

dcs

We have a wide range and models of fume extractors for solder fume extraction, removal, and other soldering applications. More over here

Notable features of our DCS fume extractor for soldering application:

Protects operators from harmful chemicals, vapors and particulates, Illuminated interior provides a clear and bright work environment, Quiet operation, digital control panel with audible and visual alarms, Standard filter sequence: pre-filter, chemical filter and HEPA filter, Custom filter sequences available for custom applications, Adjustable hinged acrylic front door allows for great visibility

Call us for help with your solder fume extraction, air filtration solution needs, toll free, 1-800-626-0664 or using our contact form below. We’ll get back to you soon as possible.

 

Fume Extractor for small 3D printers

Meet our SPL400-3D fume extractor / air filtration system / air purifier

SPL400-3D 3D Printer Fume Extractor

SPL400-3D connected to two (2) 3D Printers

You can even hook up one of the SPL400 series to two (2) of your 3D printers – neat eh?

Features

  • Ideal for 3D Printing , AM applications generating low debris
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Specifications

  • Air Flow: 510 m³/h / 300 CFM
  • Motor(s): Motorized impellers, backward inclined, non-overloading
  • Voltage: 120V or 230V
  • Dimensions: 13″W x 16″D x 20″H / 330mm x 406mm x 508mm
  • Filter Sequence: 4″ high capacity pleated pre-filter, 30% ASHRAE (F164), 6” Medical grade HEPA Filter 99.97% (F075), 2“ Chemical filter (F072-GPC)

    More chemical filtration: 4″ high capacity pleated pre-filter, 30% ASHRAE (F164), 2” Medical grade HEPA Filter 99.97% (F074), 6“ Chemical filter (AG-GPC)

  • Optional lnlets: 3” or 4″ diameter
  • Discharge: Recirculation grille
  • Sound Level: 54 dBA at full speed
  • Remote Control: Optional
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Kindly contact us for more information or for help with placing your order, toll free, 1-800-626-0664 or through the contact form on this page. We will get back to you as soon as possible.