Smart accessories for your Quatro Multi Station Fume Extractors, Dust Collectors

Auto Start Slide Valves

Divert airflow from idle workstations to active ones – Switch dust collector, fume extractor filtration system on/off remotely

1F19E5A1-4C1D-4CD3-908A-FB35EB135409

· Get more air at your active workstation by diverting it from idle ones
· Start/stop your unit remotely from each workstation
· Connect as many ASVs as needed to one dust collector
· Dust collector will continue to operate as long as one valve is open
· Multiple front/rear collar diameters*: 1.5”, 2″, 2.5″or 3″
· Two series available*: basic (AA413) and with stand (AA433)
AA413
AA433
INCLUDED: 25’ remote cable
OPTIONAL:
· Table/Stand Support Bracket for
AA413 series (#AA423) · 10’ remote cable
· Clamp or bolt ASVs directly to workbench

Dust Collectors – Fume Extractors AutoStart Valves Ready

01BFD2B3-8A54-4A4B-ABD1-7E6157172C90

Contact Us

AIR FILTRATION, Brushless, Multi-Station Dust Collectors, Velocity Series

ADVANCED AIR FILTRATION – Brushless, Multi-Station Dust Collectors

High performance bagless system

B8B63FE9-B00F-4D86-9B44-994A5983D78F

Velocity Series, X1, X2, X4

· Ideal for multiple users or workstations · Whisper quiet performance, 54 dBa
· High performance bagless system
· Airflow range 300 – 900 CFM
· Available in 120V/50Hz or 230V/50Hz, single phase
· Single, dual and quad inlet configurations 1.5”, 2”, 2.5”, 3”, 4” · Large dust storage tray, 5 gallon pail (available on X4 model)
· 3-stage filtration (knock out plate, filter wrap, cartridge)

More on the Velocity Series Air Filtration System

No brushes or filter bags to change and replace

  • Premium power series for universal use
  • Excellent for EVERYTHING: Aluminous oxide, sand, quartz, glass beads, gypsum, die-stone, ceramic alloys, acrylics, resins, etc
  • “A-Mile-A-Minute High Performance Brushless Dust Collection
  • Unique sub-micron dust collection filtration down to 0.3 microns
  • “Slide & Glide” Rejuvenating Cartridge Filter System
  • Brushless, Bagless, and Maintenance Free Industrial Motor
  • No brushes or filter bags to change and replace
  • Comprehensive Extended Two Year Warranty Protection
  • Pre-Filter Collector & Odor Exhaust Filter upgrade features available
  • Available in a configuration with both air intake grill and clean air exhaust grill – optional flex hose collars, 1 x 6″ diameter, 1 x 8″ diameter or 2 x 6″ diameter, 2 x 8″ diameter
  • Velocity X4 delivers up to 600 CFM of air moving capability
  • Whisper quiet performance, 54dBa
  • Available in 120 or 230 volts single phase, 50 or 60 Hz

Contact Us for help with your product selection or for help with placing your order

  • Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 364-5538
  • Fill out the Contact Form below, we’ll get back to you soon as possible:

Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single Quatro SPH-426 high pressure filter system.

Systems comes complete with patent pending Laser Blue Gel Seal ensuring zero by-pass for any toxic fumes.

Each system comes complete with initial set of filters including a 30% ASHRAE rated pre-filter, 99.97% certified medical grade HEPA filter, and an 8 inch deep bed chemical filter.

The microprocessor control panel is complete with visual and audible alarms, digital speed control, the ability to be interlocked for remote on/off, auto flow adjusts speed of blowers as filters get dirty.

Available accessories include snap together ducting / piping, industrial heavy duty hose, and table mounted extraction arms with damper control and various nozzle attachments.

Call for help with your product selection and / or for assistance with placing your order: 1-800-626-0664.

You may also send us a filled out contact form – http://www.airpurifiers-r-us.com/contact.html

Thanks and have a wonderful day!!😊👌👍

SPH800 Multi-Station SOLDER FUME EXTRACTOR FOR HIGH VOLUME APPLICATIONS

SPH800 with 10 Soldering Stations

SPH800 with 10 Soldering Stations

  • Cost-effective high pressure system
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Whisper quiet operation
  • Enhanced mobility with heavy duty lockable casters
  • Powered by 3 high-speed turbines (CSA/UL approved)
  • Digital control panel
  • Up to 100 lbs. (45 kg) of chemical filtration media
  • Also available: brushless units and custom filter configuration

Contact us toll free from anywhere in North America, 1-800-626-0664, or send us a completed contact form at – https://cleanairsolution.wordpress.com/contact-us/

Quatro Air Technologies MULTI-USER SOLDER FUME EXTRACTOR Model # SPM504

Multi-station soldering fume extractor configuration with optional capture arms

Multi-station, multi-user, soldering fume extractor system – up to four (4) users

  • Ideal for up to 4 workstations
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Multi-station configuration with optional capture arms: AA006 (unit mount) and AA062 (table mount) – see above photo.

Call us for more information, toll free anywhere in North America, 1-800-626-0664 or go to our contact page and send us the completed Contact Form.

Happy Soldering!! 👍😊

Multi-Station Soldering Fume Extractor Air Filtration System

 Multi-station solder fume extractor and air filtration system
  • Heavy gauge welded Steel Construction
  • Powder coated standard Quatro white
  • Standard inlet dual 3” (75 mm) diameter hose collars, optional
  • 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 4”(100mm)
  • (10) table mounted arms part # AA116 complete with tapered nozzles, table brackets and individual blast gates for air balancing
  • Main manifold piping by others
  • Discharge grills located underneath system
  • Maximum Airflow 534 CFM
  • Maximum static pressure capability 44” WC.
  • Whisper quiet operation
  • (2) CSA / UL approved 1100 Watt brushless type blowers(Brushed type motor / blower also available)
  • Model SPH-82B5, 230 volt ONLY single phase, 12 amps
  • Blowers are complete with thermal cut-outs
  • 6’ (2 meter) electrical cord set
  • Digital Control Panel:
    Manual on/off switch
    subD 9 pin interface for auto On/Off
    Resettable circuit breaker protection
    Speed control
    Auto-flow (automatically speeds up as filters get dirty)
    Pressure sensor monitoring filter status
    Audible alarms for filter and motor status
    Visual lights for operation, filter and motor status
  • Easy tool less filter change out
  • 3’ (1 meter)of heavy duty industrial hose per capture arm
  • Limited one year warranty
  • Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
  • Approximate operating weight is 150 lbs (68 kg)
Contact us for help with your product selection, toll free at 1-800-626-0664 or fill out the contact form on this page.
Thank you and Happy Soldering!! 🙂

Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single Quatro SPH-426 high pressure filter system.

Systems comes complete with patent pending Laser Blue Gel Seal ensuring zero by-pass for any toxic fumes.

Each system comes complete with initial set of filters including a 30% ASHRAE rated pre-filter, 99.97% certified medical grade HEPA filter, and an 8 inch deep bed chemical filter.

The microprocessor control panel is complete with visual and audible alarms, digital speed control, the ability to be interlocked for remote on/off, auto flow adjusts speed of blowers as filters get dirty.

Available accessories include snap together ducting / piping, industrial heavy duty hose, and table mounted extraction arms with damper control and various nozzle attachments.

SPH426 Series High Pressure, High Suction Solder Fume Extractor, Air Filtration System

Call us for help with your product selection – toll free: 1-800-626-0664

You may also fill in the Contact Form below – we will get back to you soon as possible

Quatro Air SPH-82B5 Brushless laser solder odor fume extraction system

Dust, particle, odor, chemical fumes, smoke air filtration, source capture applications

We are pleased to offer the following SPH-800 series laser fume extraction system for your air filtration application as described below:

image

SPH-800 Series  Fume Extractor Specifications:

•   Heavy gage welded Steel Construction
•   Powder coated standard Quatro white
• Standard inlet dual 4” (100 mm) diameter hose collars, optional single
or dual 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 3”(75mm)
•   Discharge grills located underneath system
•   Maximum Airflow 534 CFM (252 l/sec)
•   Maximum static pressure capability 44”w.c. (11 KPa)
•   Whisper quiet operation 54 dBA
•   (2) CSA/UL approved 1100 Watt brushless type blowers
•   Model SPH-82B5, 230 volt ONLY single phase, 12 amps
•   Blowers are complete with thermal cut-outs
•   6’ (2 meter) electrical cord set

Filter sequence supplied with system:

o (2) Multi layered dual inlet knock out pad
o (2) 30% ASHRAE rated pleated filter
o (2) 99.97% on 0.3 microns certified medical grade HEPA filter
o (2) 8” deep general purpose chemical filter module

image

•   Easy tool less filter change out
•   6’ (2 meters)of heavy duty industrial hose
•   Limited one year warranty
•   Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
•   Approximate operating weight is 150 lbs (68 kg)

Contact Us

  • Toll Free:
    1-888-395-0330 or
    1-800-626-0664 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 421-0658

Multi-Station, 4, 6, 8, 10 Soldering Station Fume Extractor Air Filtration System

Multi-Station, 4, 6, 8, 10 Soldering Station Fume Extractor Air Filtration System

Lately we have received inquiries for multi-station soldering fume, odor, extractor and air filtration system – for desktop, tabletop hand soldering operation.

Our SPH-400 series and our SPH-800 series are up to the challenge – they are, as a matter of fact designed, to meet those needs.

First, let’s talk about filtration capabilities and filter configuration.

SPH-400 series

SPH-800 series

  • Capture solder smoke & fumes at source using small diameter tip extraction
  • Ideal for up to 20 soldering irons
  • High pressure system is economical
  • Whisper quiet ( 52 dba )
  • Compact installation requiring no bulky and expensive ductwork
  • Filters easily accessed and changed in less then 1 minute ( no tools required )
  • Powder coated durable welded cabinet
  • Recirculating purified air reduces heating and air conditioning cost
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions with up to 560cfm.
  • This unit has many options and can be customized for OEM applications
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended

SPH-800 10 Soldering Station Set Up (example only – your layout may be different from this – we ask that you provide us with a drawing or sketch of your desired layout should you want us to supply you with the piping, connections, hoses, and capture arms)

SPH-426, 8 Soldering Station Set Up (example from an actual work site)

Contact us for help in choosing the right soldering fume extraction air filtration system for your needs.

Call toll free 1-800-626-0664, outside of North America call +1-514-421-0658 or fill out the contact form below.

Laser Fumes, Odor, Dust, Particle Extraction Filtration

     The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications     With large collection bag, HEPA Filter & Deepbed Odor filters     LaserBlue Gel seal guarantees NO BYPASS     Dual hi-speed turbine for high suction, pressure & airflow     Whisper quiet operation is office friendly     Universal design allows for 2.5", 3", 4" inlet along with discharge


The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications
With large collection bag, HEPA Filter & Deepbed Odor filters
LaserBlue Gel seal guarantees NO BYPASS
Dual hi-speed turbine for high suction, pressure & airflow
Whisper quiet operation is office friendly
Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Cutting, engraving, using a Laser Cutter, Laser Engraving machine can produce nasty, unhealthy chemical fumes, odors, smoke, dust. Reduce your exposure to these health hazards – capture close to the source of these pollutants.

Whether you are using any of the following or other brands of Laser Cutter, Laser Engraving machine / equipment, we have a Fume, Smoke, Dust Extractor / Air Filtration System / Air Purifier for your needs:

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Call us toll free, 1-800-626-0664, outside of North America, +1514-421-0658, Skype:lito.espinosa – you can also fill out the contact form below.