You can also use the contact from below – we will get back to you as soon as possible.
Learn more about 3D Printing aka AM (Additive Manufacturing):
3D printing, also known as additive manufacturing (AM), refers to processes used to create a three-dimensional objectin which layers of material are formed under computer control to create an object. Objects can be of almost any shape or geometry and are produced using digital model data from a 3D model or another electronic data source such as an Additive Manufacturing File (AMF) file. STL is one of the most common file types that 3D printers can read. Thus, unlike material removed from a stock in the conventional machining process, 3D printing or AM builds a three-dimensional object from computer-aided design (CAD) model or AMF file by successively adding material layer by layer.
Did you know you can get a SolderPure solder fume extractor configured for a dual work-station set up?
Yes – it is like get two (2) for the price of one unit. Neat eh?! 🙂 But seriously, one of the neat features of the SolderPure is that it could cover two soldering stations with one single SolderPure solder fume extractor / air filtration system.
Features that make this a worthwhile investment:
Ideal for low debris generating applications
Motorized brushless impeller
Enhanced mobility with heavy duty lockable casters
Multi-stage filtration system: pre-filter, HEPA and chemical odor filter.
Whisper quiet operation
Digital control panel
Call us toll free, 1-800-626-0664, for help with your product selection or fill out and send us the contact form on this page.
People ask themselves why they should be concerned about the IAQ (indoor air quality) in their home and / or office?
Many think that pollution is only outside. Wrong, it’s the complete opposite. Indoor air quality (IAQ) is a serious concern because buildings and homes are becoming increasingly more sealed to reduce energy consumption. Recent studies have shown that indoor pollution is up to 5x higher than outdoor pollution and we spend 90% of our time indoors. The World Health Organization has even listed indoor pollution as one of the most dangerous threats to our health.
There are airborne particulates as well as chemical gases off-gasing from various materials found indoors.
For example, Benzene, used in plastics, rubber, detergents, tobacco smoke, furniture wax and paint. Formaldehyde, can be found in paper bags, facial tissues, paper towels, table napkins and synthetic fibers. Ammonia, found in window cleaners, floor waxes and fertilizers.
BreathEasy Home Office Small Commercial Spaces Series
The CSA600 series Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.
There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:
• The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.
The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge
• The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
• This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.
The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.
• Depending on the type of media the modules could weigh as much as 70 lbs.
• Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
• This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
• The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter
Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.
Contact us for help with your Laser Cutting, Engraving Fume Extraction System needs:
Call us toll free in North America 1-800-626-0664 or fill out the contact form below.
Indoor Air Quality In Your Office, Work Environment | How to Improve It
Indoor air pollution affects worker health, well-being and overall productivity.
You spend your days toiling away on keyboards, on the phone, preparing for meetings, presentations and projects. The office and home have become synonymous workplace environments for a variety of professionals. What is it that you have in common with most people who work in an office?
Aside from the sigh of relief and waited anticipation for Friday to roll around – actually, most office workers or those who work from home are regularly exposed to poor indoor air.
In a 2012 study on office IAQ (Indoor Air Quality) and workers’ blood, scientists found concentrations of toxins in office air that were 3-5 times higher than those reported in previous studies of household air, “suggesting that offices may represent a unique and important exposure environment.”
HEPA + Activated Carbon Chemical Filter
Compact portable system for people who suffer with Allergen super sensitivity
Ozone free system, with 99.97% sub micron dust removal
Powerful backward inclined motorized impeller provides high room air changes
High efficiency motor with low amperage draw
Digital variable speed control allows for whisper quiet night time operation
Airflow: 700 CFM free air, Operating range: 60 – 500 CFM
Whisper quiet operation bedtime operation, 42 dBA at low speed
Audible and visual LED alarms provide feedback
Microprocessor AUTOFLOW feature speeds up fan automatically as filters get dirty to maintain airflow
Easy serviceability and filter changing
Ability to customize filter sequence to meet specific needs
Ability to customize filters for people suffering from a specific and/or unique Chemical sensitivity
Contact us for help with your product selection, call toll free from anywhere in North America, 1-800-626-0664, or use the contact form below:
So you have some construction, renovation work to be done in your school, institution, hospital, workplace and you’re concerned about dust and other airborne particulates contaminating your indoor air specially in highly sensitive areas in the vicinity of the work area.
Our PRO Series Air Filtration System – the BP1000 and the BP2000 series can be of help to you. These air purification systems can be configured to filter fine dust, coarse dust, as well as odors from paint and other chemical offgassing.
BP2000 Series Air Filtration System
Multi-Stage Air Filtration Systems | Airborne Particulates | Chemical Gas Fumes Odors
High dust and odor removal, filtration capabilities | Attractive, compact and portable | Extremely quiet, 56 dBA
Contact Us for help with your product selection:
Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)