Ease of Maintenance is built-in in the design

Yes, our Quatro Air Technologies BP PRO Series air filtration systems are easy to capture-refillable-filtersmaintain. Made here in Canada, we have shipped them and are being used in places, businesses and institutions around the world.

What if something fails, you may asked?

Product maintenance is easy and simple; filter changes are effected easily and only take very little time as in less than a minute or two.

Maintenance of filters as well as the unit does not require a highly skilled and trained technician, as a matter of fact, any repair, if and when required, only needs the use of a screw driver tool.

Replacement parts and replacement filters are readily available, most, if not all, are stocked items.

Call us, toll free in North America, 1-800-626-0664, for help with your product selection or for your replacement filter needs. You may also reach out to us from outside North America by calling 1-514-364-5538, Skype: lito.espinosa, or filling out the contact form below.

Advertisements

BP2000 Air Filtration System For Airborne Chemicals Gases Fumes Odors

The BP2000 industrial air purifier has proven to be one of the most effectivesolutions against a wide range of airborne chemicals and odours, including exhaust gases, paints, lacquers, cleaning supplies, pesticides, building materials and furnishings, office equipment, glues, adhesives, disinfectants and many more. 

Engineered to handle high concentrations of chemical pollutants, the BP2000 provides capture-bp2000-featuresmaximum protection for commercial and industrial spaces and have been used to reduce gas phase contaminants to below United StatesOccupational Safety & Health Administration’s (OSHA) TLV.

Built to meet the regulations for ventilation rates for large spaces, the BP2000 is equipped with high quality blower motors, which guarantee a very high volumetric flow rate of 1000 Cubic Feet per Minute (CFM).

The BP2000 is a highly customizable unit, capable of being configured in different ways to eliminate a huge variety of pollutants – By using various combinationsof filters and 26 different chemical filtration media, the BP2000 is the toolof choice against high concentrations of aldehydes, alcohols, acids, VOCs,fluorinated hydrocarbons, chlorinated hydrocarbons, alkenes & alkanes,acetates and many other chemical groups.It can also be configured to remove microscopic particulates when the medical grade HEPA filters are included in the set-up. No matter the chosen configuration, the filtration process of the BP2000 usually starts with a Dust Filter, which is designed to remove larger particulates, thereby increasing the efficiency of the other filters and elongating their life span.

More on the BP PRO Series  Air Filtration Systems, click here.

Feel free to contact us for help with your product selection. Call us, toll free in North America, 1-800-626-0664 or fill in the contact form. We will get back to you soon as possible.

Light Duty 3D Printing Fume Extractor

Looking for a light duty 3D printing fume extractor, air filtration system?

Screen Shot 2017-07-26 at 2.41.38 PMLook no further, we have one for you.

Meet our Quatro SPL400 series dust / fume extractor / air filtration system.

Available with various useful optional pieces such as unit mounted capture arm with plexi nozzle, foot switch for remote on/off capabilities, choice of two filter sequence, for airborne particulate concern as well as mainly VOCs, chemical odor removal.

  • Ideal for 3D Printing , AM applications generating low debris
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Call us for help with your product selection, toll free: 1-800-626-0664, from anywhere in North America or fill out and send us the contact form below.

Happy 3D Printing everyone! 🙂

 

Medicinal Marijuana, Cannabis Odor, Processing Lab, Police Property Evidence Room, Air Filtration System

Designed for continuous-duty operation in mission critical applications (healthcare, law enforcement, military) our air purification systems are essential tools for creating a safer and healthier work environment. Built to perform flawlessly in virtually any environment, our air purifiers feature a proven multi-stage filtration system including HEPA and chemical filters, high efficiency motors, and a diverse range of accessories for custom configurations.

Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP2000 delivers superior air quality for residential and commercial spaces, office, healthcare facilities, clinics, labs, buildings and any workshops or production facilities that require effective air filtration.

The standard configuration for BP2000 is standalone unit for general air purification.

Screen Shot 2015-09-16 at 10.15.37 AM

Multi-Stage Air Filtration Systems | Airborne Particulates | Chemical Gas Fumes Odors

For virtually any application that requires removal of chemicals, odors, fumes, vapors and particles directly at the source, BP2000’s wide selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants  before they spread into the surrounding environment.capture-bp2000-features

Recirculation unit: Continuously recirculating the ambient room air through a multi-stage air filtration system, removing airborne contaminants every time the air passes through the unit.

Positive air unit: The air purification units introduce clean air into the environment maintaining a higher air pressure (positive) and limiting the flow of contaminated air into the room. (Ideal for patients with sensitive or compromised immune systems)

Negative air unit: The units create a low pressure environment by filtering the contaminated air and venting it out of the room, preventing the spreading of contaminants from the room. (Ideal for patients with contagious diseases)

Contact us for help with your product / model selection, toll free, anywhere in North America, 1-800-626-0664, Skype: lito.espinosa, or complete and send us the contact form below.

Extract fumes from injection molding machines

R.H. wrote to inquire about our fume extractors for use when purging their injection molding machine – issue with smoke and odor:

We would only open the exhaust when purging the machine, so I only envision one machine needing extraction at a time.  We never run more than four machines total, so worst case scenario, we’d need to extract from four.  I envision having flexible ducting to each machine, with a open/closeable vent at each machine above the nozzle.  If that isn’t feasible, I would see if there is a way we could fabricate an enclosure around the nozzle.  As far as the manifold goes, I envision something very much like the one pictured in your brochure with the ten stations (an 8-10 ft. section of pvc with ports coming off of it), the only difference, is the flexible hose (duct hose) would be longer than what is pictured.

After going back and forth discussing various options, we have decided to go with the CSA626 Fume Extractor with a modified filter sequence incorporating a 20″ chemical filter section.

R.H writes back, after the unit was delivered and put to use:

I just put the fume extractor to use for the first time; on a machine/material that has known to “smoke out” the building…let me say, I am thoroughly impressed with the performance of the unit.  I have to admit, I was somewhat skeptical when you stated that it would remove the smell as well, but sure enough, it’s performing just like you said it would.  It looks as though  all of the research/questions have resulted in receiving a great product…thanks!

Best Regards,

R

CSA-600 - Heavy Duty Dust & Odor Removal

The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Call us toll free, 1-800-626-0664, for help with your product selection, or use the contact form below.

 

Economize on your chemical media, activated carbon filter replacement

Our chemical gas, odor, filters come in a refillable canister housing.

capture-refillable-filters

Refillable chemical filters: They contain carefully engineered filtration media blends to remove gases, odors, chemical vapors and volatile organic compounds (VOCs). We offer various blends to choose from for specific chemical gas, odor, filtration needs.

Our refillable chemical media gas, odor filters come in a “Multi-V” extended surface design for low pressure, high airflow, easy to service, no tools required.

Come visit our site, or click on the following link – http://www.airpurifiers-r-us.com/hepa-and-chemical-filtration.html

Feel free to call us for help with your air filtration selection needs, toll free in North America, 1-800-626-0664.

You may also send us the contact form below:

Fume Extractor, Light Duty, Multi-station, multi-user configuration with optional capture arms

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller, Enhanced mobility with heavy duty lockable casters, Multi-stage filtration system: pre-filter, HEPA and chemical filter, Whisper quiet operation,  Optional digital control panel

  • Air Flow: 1100 m³/h / 475 CFM
  • Motor/fan: Backward inclined, non-overloading, brushless
  • Voltage: 120V or 230V
  • Dimensions: 15″W x 23″D x 30″H / 381mm x 585mm x 762mm
  • Filter Sequence: Pleated pre-filter, 30% ASHRAE (F265), Medical grade HEPA Filter 99.97% (F057), Chemical filter (F033-GPC)
  • Optional lnlets: 2×3”, 3×3” or 4×3″
  • Discharge: Recirculation grille; optional silencer (H250]
  • Sound Level: 62 dBA at full speed
  • Remote Control: Optional
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps
soldering-spm504

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller

Kindly contact us for help with your product selection, pricing, and / or help with ordering, Toll free: 1-800-626-0664.

You may also use the contact form on this page. Have a wonderful day!! 🙂