Effective solution to wide range of airborne chemicals and odors: exhaust gases, paints, lacquers, cleaning supplies, pesticides, building materials and furnishings, office equipment, glues, adhesives, disinfectants, and many more.
Reduce gas phase contaminants to below OSHA’s TLV levels.
Built to meet the regulations for ventilation rates for spaces up to 1200 square feet, the BP2000 is equipped with a high quality blower motor which guarantee a very high volumetric flow rate.
Highly customizable, capable to eliminate a huge variety of pollutants.
By using various combinations of filters and 26 different chemical filtration media, the BP2000 is the air filtration system of choice against high concentrations of aldehydes, alcohols, acids, VOCs, fluorinated hydrocarbons, chlorinated hydrocarbons, alkenes and alkanes, acetates and many other chemical groups.
Specifications: Dimensions: 71″H x 24″W x 26″D, 350 lbs
Airflow (CFM): 1000 nominal, adjustable intake grills
HEPA filter: 99.97% of particles down to 0.3 micron; available in certain configuration
Chemical filter: up to 200 lbs; 26 blends available
UV Light: Available in certain configurations
Power: 120V, 60 Hz, 4A (240V available)
Sound levels: < 54dbA at low speed
Cabinet: Heavy guage welded steel
Options: high air flow configurations; collars for ducting
Microprocessor ensures minimum airflow to maintain negative room pressure as per CDC Standards.
Sensitive Monitoring Equipment For Sensitive Applications.
* Digital display
* monitors pressure in room
* Audible and visual alarms
* Easy to program and install
* Optional controls to alarm or modulate airflow
* Optional tamper proof key lock
* Optional RS-485 communications capability
Range: -0.20000 to +0.20000 inches H2O Resolution: 5% of reading
Accuracy: ±10% of reading ±0.00001 inches H2O Display Update: 0.5 seconds
Low Alarm Range: -0.19500 to 0.19500 inches H2O
High Alarm Range: -0.19500 to 0.19500 inches H2O
Analog Output: 0 to 10 VDC or 4 to 20 mA
Operating Temperature Range: 32 to 120 degrees F
Input Power: 24 VAC, 5 watts max
Display Weight: 0.7 lb
Sensor Temperature Compensated Range: 55 to 95 degrees F Sensor Weight: 0.2 lb
• Heavy gage welded Steel Construction
• Powder coated standard Quatro white
• Standard inlet dual 4” (100 mm) diameter hose collars, optional single
or dual 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 3”(75mm)
• Discharge grills located underneath system
• Maximum Airflow 534 CFM (252 l/sec)
• Maximum static pressure capability 44”w.c. (11 KPa)
• Whisper quiet operation 54 dBA
• (2) CSA/UL approved 1100 Watt brushless type blowers
• Model SPH-82B5, 230 volt ONLY single phase, 12 amps
• Blowers are complete with thermal cut-outs
• 6’ (2 meter) electrical cord set
Filter sequence supplied with system:
o (2) Multi layered dual inlet knock out pad
o (2) 30% ASHRAE rated pleated filter
o (2) 99.97% on 0.3 microns certified medical grade HEPA filter
o (2) 8” deep general purpose chemical filter module
• Easy tool less filter change out
• 6’ (2 meters)of heavy duty industrial hose
• Limited one year warranty
• Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
• Approximate operating weight is 150 lbs (68 kg)
1-800-626-0664 (North America- Continental USA and Canada)
Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP Air Purifiers deliver superior air quality for healthcare facilities.
The BP Air Purifiers are available as standalone units (standard configuration) for general air purification. For virtually any application that requires removal of chemicals, vapors and particles directly at the source, a vast selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants before they spread into the environment.
Although very effective against very fine particles, HEPA filters do not filter out gasses and odor molecules.Our refillable chemical filters use carefully formulated filtration media blends to remove odors, chemical vapors and volatile organic compounds (VOCs).
Contact Us for help in choosing the right clean air solution for your needs
1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
Designed to enhance the performance of the SPH800 air purifiers, the PF800 passive pre-filter module captures larger dust and particles protecting the air purifier’s HEPA and/or activated carbon filter.
For customers who work with materials such as acrylic, plastic, wood with resins and adhesive backing we offer an optional bag pre-filter module that would extend the life of the HEPA filter and the chemical media.
The bag pre-filter section filters the molten, heated particulates from plastic, acrylic, wood resin, wood adhesive backing that eventually cool down and solidify inside the bag filter – (TIP) just shaking the bag prefilter after each use loosens up this cooled down particulates stuck to the prefilter bag.