Not your ordinary Fume Extractor

SPH400 Series fume extractors for light & medium duty

Laser Engraving, Laser Cutting, Laser Marking, Soldering Fumes and more

Dual high speed turbine for high suction, high pressure and high airflow. Allows the fume extractor to move contaminated air through 12 inches of filtration stages

Features

  • Our most popular model for light and medium duty applications3dprinting_sph400_filters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Up to 50 lbs. (23 kg) of chemical filtration media
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Enhanced mobility with heavy duty lockable casters
  • Whisper quiet operation
  • Digital control panel
  • Also available: brushless units and custom filter configurations

Specifications

  • Air Flow: 0-482 m³/h / 0-280 CFM
  • Max Pressure: 90” W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 12″W x 15″D x 24″H / 304mm x 381mm x 762mm
  • Filter Sequence: Multi layered knock-out pad (F166-125), Pleated pre-filter, 30% ASHRAE rated (F071), 2” Medical grade HEPA filter 99.97% (F074), 8“ Chemical filter (AG097)
  • Optional lnlets: 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side collars for venting to the exterior
  • Sound Level: 62 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Webpage link: Fume Extractor (Dust), Laser Cutting, Laser Marking, Laser Engraving, Soldering Fumes

Call us for help with placing your order or for more information, toll free in North America, 1-800-626-0664.

You may also complete and send the contact form below, we’ll get back to you the same day:

 

 

Advertisements

BP PRO Series Air Filtration System – BP2000, BP1000 Series

Your Clean Air Solution for Chemical Odor, Airborne Dust Particle – Your Multiple Purpose Air Purifiers

 

Contact us for help with your product selection, toll free, 1-800-626-0664 or complete and send us the contact form below:

 

 

SPH400, SPH426, Not Your Ordinary Laser Fume Extractor, Air Filtration System

Our most popular model Laser Fume Extractor for light and medium duty applications

The SPH400 series Laser Fume Extractor, Air Filtration System, is our most popular model for light and medium duty applications. It’s made here in North America, in Pointe-Claire, Quebec, Canada but has found its way to shops, labs, offices, workplaces around the world.

Here’s why.

4 stages, multi-stages of filtration

Capture-PF400-PF800

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

Same type of filter that is used in hospital operating rooms

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

Odors, Fumes – gas phase filter is quite large and 8” deep

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

Ideal at removing many VOC’s

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

A gel seal material to guarantee zero by-pass

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

High pressure blowers to overcome the resistance created by the deep bed chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

For more information, visit our webpage at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html or contact us using the contact form below.

Light Duty 3D Printing Fume Extractor

Looking for a light duty 3D printing fume extractor, air filtration system?

Screen Shot 2017-07-26 at 2.41.38 PMLook no further, we have one for you.

Meet our Quatro SPL400 series dust / fume extractor / air filtration system.

Available with various useful optional pieces such as unit mounted capture arm with plexi nozzle, foot switch for remote on/off capabilities, choice of two filter sequence, for airborne particulate concern as well as mainly VOCs, chemical odor removal.

  • Ideal for 3D Printing , AM applications generating low debris
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Call us for help with your product selection, toll free: 1-800-626-0664, from anywhere in North America or fill out and send us the contact form below.

Happy 3D Printing everyone! 🙂

 

Air Purifiers for Volcanic Vog, Volcanic Smog

Extreme Air Purifier for Volcanic Smog

BreathEasy BP PRO series and BH series (home, office, small spaces) air filtration systemsbh-airflow are our air purifying units configured specifically to adsorb the dangerous chemicals, gases and toxic particles emitted from volcanic smog, or VOG. When Sulphur dioxide and other gases and particles are emitted by an erupting volcano that react with oxygen and moisture in the presence of sunlight this forms volcanic smog and fog.

A special blend of chemical media provides increased chemical filtration, which is ideal for residents and businesses located within 100 miles of a volcano.

So, What is VOG exactly ?

Volcanic smog or VOG is formed when sulfur dioxide and other pollutants from an active volcano react with oxygen, moisture, dust and sunlight. This creates a dangerous mix of airborne pollutants that can penetrate deep into the lungs and irritate the tissues and mucus membranes of the eyes, nose and throat. The long-term effects of breathing in volcanic smog are unknown.

Call us for help with your product selection, toll free: 1-800-626-0664, Skype: lito.espinosa, or fill out and send the contact form below.

Extract fumes from injection molding machines

R.H. wrote to inquire about our fume extractors for use when purging their injection molding machine – issue with smoke and odor:

We would only open the exhaust when purging the machine, so I only envision one machine needing extraction at a time.  We never run more than four machines total, so worst case scenario, we’d need to extract from four.  I envision having flexible ducting to each machine, with a open/closeable vent at each machine above the nozzle.  If that isn’t feasible, I would see if there is a way we could fabricate an enclosure around the nozzle.  As far as the manifold goes, I envision something very much like the one pictured in your brochure with the ten stations (an 8-10 ft. section of pvc with ports coming off of it), the only difference, is the flexible hose (duct hose) would be longer than what is pictured.

After going back and forth discussing various options, we have decided to go with the CSA626 Fume Extractor with a modified filter sequence incorporating a 20″ chemical filter section.

R.H writes back, after the unit was delivered and put to use:

I just put the fume extractor to use for the first time; on a machine/material that has known to “smoke out” the building…let me say, I am thoroughly impressed with the performance of the unit.  I have to admit, I was somewhat skeptical when you stated that it would remove the smell as well, but sure enough, it’s performing just like you said it would.  It looks as though  all of the research/questions have resulted in receiving a great product…thanks!

Best Regards,

R

CSA-600 - Heavy Duty Dust & Odor Removal

The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Call us toll free, 1-800-626-0664, for help with your product selection, or use the contact form below.

 

handle high concentrations of chemicals, gases, odors, particles and biological contaminants

Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP2000 delivers superior air quality for residential and commercial spaces, office, healthcare facilities, clinics, labs, buildings and any workshops or production facilities that require effective air filtration.

BP2000 Series for law enforcement evidence and property room storage

Air Purifiers, Air Cleaners, for odor and fine airborne dust particle removal

The standard configuration for BP2000 is standalone unit for general air purification.

For virtually any application that requires removal of chemicals, odors, fumes, vapors and particles directly at the source, BP2000’s wide selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants  before they spread into the surrounding environment.

Recirculation unit: Continuously recirculating the ambient room air through a multi-stage air filtration system, removing airborne contaminants every time the air passes through the unit.

Positive air unit: The air purification units introduce clean air into the environment maintaining a higher air pressure (positive) and limiting the flow of contaminated air into the room. (Ideal for patients with sensitive or compromised immune systems)

Negative air unit: The units create a low pressure environment by filtering the contaminated air and venting it out of the room, preventing the spreading of contaminants from the room. (Ideal for patients with contagious diseases)

Source capture: The units equipped with source capture options filter contaminants at their point of origin, capturing the contaminants before they  disperse in the surrounding environment.

99.97% Certified HEPA Filters are very effective against viruses, bacteria, fungal spores and very fine particles

Refillable chemical filters contain carefully engineered filtration media blends to remove gases, odors, chemical vapors and volatile organic compounds (VOCs).

The BP2000 is also available in a Horizontal Orientation, same choice of filter configurations to match your needs and and application, can be wall mounted, ceiling suspended, or on the floor with wheels for mobility.

Feel free to call us, toll free, 1-800-626-0664, for help and suggestions with your model selection or use the contact form below.