Passive Pre-Filter Modules, Laser Fume Extractors

PF801/PF401 Passive Front Access

Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter. Designed to enhance the performance of the SPH800/SPH400 air purifiers.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

Who needs it?
Customers that have heavy dust loadings or any type of “sticky” fumes will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

How can I use it?
The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

| More on our Passive Pre-filter Modules for Laser Fume Extractors |

Call us, toll free, 1-800-626-0664, for help with your product selection. You could also send us a completed contact form below:

Advertisements

Not your ordinary Fume Extractor

SPH400 Series fume extractors for light & medium duty

Laser Engraving, Laser Cutting, Laser Marking, Soldering Fumes and more

Dual high speed turbine for high suction, high pressure and high airflow. Allows the fume extractor to move contaminated air through 12 inches of filtration stages

Features

  • Our most popular model for light and medium duty applications3dprinting_sph400_filters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Up to 50 lbs. (23 kg) of chemical filtration media
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Enhanced mobility with heavy duty lockable casters
  • Whisper quiet operation
  • Digital control panel
  • Also available: brushless units and custom filter configurations

Specifications

  • Air Flow: 0-482 m³/h / 0-280 CFM
  • Max Pressure: 90” W.C. / 22 kPa
  • Motor(s): 2 X 1.0 kW High Speed Turbine
  • Voltage: 120V or 230V
  • Dimensions: 12″W x 15″D x 24″H / 304mm x 381mm x 762mm
  • Filter Sequence: Multi layered knock-out pad (F166-125), Pleated pre-filter, 30% ASHRAE rated (F071), 2” Medical grade HEPA filter 99.97% (F074), 8“ Chemical filter (AG097)
  • Optional lnlets: 2”, 3” or 4″ diameter
  • Discharge: Recirculation grille (Standard configuration);
  • Optional 3″ or 4″ side collars for venting to the exterior
  • Sound Level: 62 dBA at full speed
  • Controls: Remote ON/OFF, communication capabilities, audible and visual alarms
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Webpage link: Fume Extractor (Dust), Laser Cutting, Laser Marking, Laser Engraving, Soldering Fumes

Call us for help with placing your order or for more information, toll free in North America, 1-800-626-0664.

You may also complete and send the contact form below, we’ll get back to you the same day:

 

 

Laser cutting | Sticky Smoke | Premature clogging

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later 🙂

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF800/PF400 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

Capture-PF400-PF800

Who needs it?

Customers that have heavy dust loadings will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF800/PF400 modules contain three (PF800) or two (PF400) high-capacity antimicrobial, multilayered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

How easy is it to change the filters?

Whether you have a standalone or add-on module filter bags are accessed in the same manner. Remove inlet cover, quarter turn 4 locking mechanisms and remove the section to replace bags. Designed to be clean simple and effective. Dust is contained in the bags to
minimize the mess and exposure of personnel to potentially harmful dust.

How can I use it?

The PF800/PF400 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are
available upon request.

Dimensions: H x W x D

PF800: 30 x 16 x 25 (in) / 76 x 40 x 64 (cm)
PF400: 24 x 12 x 15 (in)  / 76 x 30 x 38 (cm)

Contact us for help with your product selection. Toll free: 1-800-626-0664 or fill out the contact form below.

Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

  • Rapidly becoming the standard for small engravers the JetStream offers significant advantages and performance over the competition
  • Maximum airflow 110 CFM with a maximum pressure of 90″ W.C.
  • 1 micron pre-filter bag, easily replaced
  • Built in silencer reduces noise to 49 dBA
  • Sleek, modern and easily portable
  • Full range speed control
  • CSA/UL approved motors with circuit breaker and thermal cut-out protection
  • Remote on-off communication
  • Optional 6 Gallon (26 l)Knock out bucket for larger debris
Jetstream - Small Compact Dust Collector

Jetstream – Small Compact Dust Collector

 Call for help with your product selection – 1-800-626-0664 or fill out the Contact Form below.

Laser Fume Extractor | Morntech (MT- L1290)

A prospective client, who we happily supplied with the matching air filtration system / Laser Fume, Laser Cutting, Laser Engraving Dust, Odor, Fume Extractor system, initially wrote:

Hello,

I contacted you via phone earlier today regarding an air filtration system. According to the head of our tech department this should be compatible with the Morntech (MT- L1290) that we have ordered. The specifications are listed in the right column of the chart below.

Thanks,

Tracy L

Our SPH-426 (SPH-400 series) was the perfect match for their Morntech (MT- L1290) laser cutting, laser engraving machine. Just to mention other brands of Laser cutters, Laser markers, Laser engravers- we’ve matched our Laser Fume, Dust, Odor Extractors with:

List of supported lasers

Laser and Laser Marking

SPH-400 – Multi Purpose Filtration Station

Description

  • Our most popular unit for small to medium duty laser applications
  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications
  • We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended

SPH400-2.png (115228 bytes) SPH400-3.png (182238 bytes) adj_ext_arm_02.JPG (14999 bytes) adj_ext_arm_01.JPG (26274 bytes) extraction_arm.JPG (51083 bytes) iseries_ctl_pnl.JPG (99352 bytes)

For help in choosing the right clean air solution for your needs –  Call us, toll free: 1-800-626-0664 (Most of USA and Canada), +1-514-421-0658 (outside of North America), Skype: lito.espinosa or fill out the Contact Form below.

Laser Fumes, Odor, Dust, Particle Extraction Filtration

     The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications     With large collection bag, HEPA Filter & Deepbed Odor filters     LaserBlue Gel seal guarantees NO BYPASS     Dual hi-speed turbine for high suction, pressure & airflow     Whisper quiet operation is office friendly     Universal design allows for 2.5", 3", 4" inlet along with discharge


The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications
With large collection bag, HEPA Filter & Deepbed Odor filters
LaserBlue Gel seal guarantees NO BYPASS
Dual hi-speed turbine for high suction, pressure & airflow
Whisper quiet operation is office friendly
Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Cutting, engraving, using a Laser Cutter, Laser Engraving machine can produce nasty, unhealthy chemical fumes, odors, smoke, dust. Reduce your exposure to these health hazards – capture close to the source of these pollutants.

Whether you are using any of the following or other brands of Laser Cutter, Laser Engraving machine / equipment, we have a Fume, Smoke, Dust Extractor / Air Filtration System / Air Purifier for your needs:

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Call us toll free, 1-800-626-0664, outside of North America, +1514-421-0658, Skype:lito.espinosa – you can also fill out the contact form below.

Air filtration system for fine dust particles as well as small amounts of chemical fumes

Air filtration system for fine dust particles as well as small amounts of chemical fumes

Prospective customer writes:

We are hoping to source a unit that can control fine dust particles as well as small amounts of chemical fumes (methyl methacrylate / butyl acrylate) released from cutting, routing or gluing solid surface substances such as Corian by Du Pont. We recently had a Ministry of Labour Hygienist come in to advise us about the possibility of combustible dust explosions and she was adamant that in any system where the five elements of a dust explosion are present: 1. Confinement, 2. Oxygen, 3. Explosive material, 4. Ignition source, 5. Dispersion – the employer is obligated to ensure that the machinery used to control the dust or fumes is appropriately rated for the task to prevent the possibility of dust explosions by removing at least one of the above elements – the easiest being the ignition source: static electricity or spark.

As such we are looking for an carbon filter or HEPA filter fitted unit capable of handling dust, and fume extraction while remaining a safe option for an environment with elevated levels of combustible gas.

Recommended solution, our Brushless CSA600 series, model / part number  CSA 6B5-S4G-ET

CSA-600 – Heavy Duty Dust & Odor Removal
Description

  • The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.
  • A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.
  • A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.
  • Chemical compounds can be customized based on specific applications
  • With large collection bag, HEPA Filter & Deepbed Odor filters
  • LaserBlue Gel seal guarantees NO BYPASS
  • Dual hi-speed turbine for high suction, pressure & airflow
  • Whisper quiet operation is office friendly
  • Universal design allows for 2.5″, 3″, 4″ inlet along with discharge
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended
CSA-626 2 Station
Height 45″(1140mm)
Width 21″(540mm)
Depth 13″(330mm)
Weight 140lb (63.50kg)
CFM 282 (480m3 / h)
W.C 90″
# / Pallet by Plane N/A
# / Pallet by Boat N/A

Contact Us for help in choosing the right air filtration system for your needs

Request for a PDF for the Brushless CSA600 series, model / part number CSA 6B5-S4G-ET. Call us toll free (North America) 1-800-626-0664, outside of North America call +1-514-421-0658 or complete the contact form below.