FUME EXTRACTOR FOR SMALL 3D PRINTERS

Quatro Air SPL400-3D

CB870684-FC90-457B-A90F-3B56BBF51085

Features

  • Light duty fume extractor for Laser engraving, marking, and AM applications (3D Printing)
  • Low-profile, space saving design
  • Multiple filter arrangement allows for disposable bag, HEPA cartridge and gas phase filter
  • Built in whisper quiet features
  • Custom chemical filters can be incorporated to deal with specific gas phase contaminants
  • Optional digital control panel

PDF spec sheet / pricing : http://www.airpurifiers-r-us.com/assets/spl400-3d1-usd-%24-list-2.pdf

Contact Us

Pre-filter module for your laser fume extractor

Are you consuming, replacing your main filters, chemical odor filter, HEPA filter, sooner rather than later?

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later.

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF801/PF401 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

Contact us for more information – go on to our contact tab or send us a completed contact form below:

Passive Pre-Filter Modules, Laser Fume Extractors

PF801/PF401 Passive Front Access

Pre-filter Modules Capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter. Designed to enhance the performance of the SPH800/SPH400 air purifiers.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

Who needs it?
Customers that have heavy dust loadings or any type of “sticky” fumes will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

How can I use it?
The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

| More on our Passive Pre-filter Modules for Laser Fume Extractors |

Call us, toll free, 1-800-626-0664, for help with your product selection. You could also send us a completed contact form below:

Removing heavy chemical odors in your laboratory, clinic, office

Recirculating Air Filtration System, Air Purifier

RECIRCULATION – the air filtration system continuously recirculate the air in the environment and progressively reduces the concentration of contaminants.

Our BreathEasy PRO series of industrial, commercial grade air filtration systems, air purifiers configured with plenty of chemical odor filtration media will help make a difference in the indoor air quality in your lab, laboratory, clinic, or workplace. It will help reduce your exposure to unhealthy chemical gases, fumes,  odors, VOCs (volatile organic compounds).

capture-bp2000-features

BP2000 Series Air Filtration System

 

  • Effective solution to wide range of airborne chemicals and odors: exhaust gases, paints, lacquers, cleaning supplies, pesticides, building materials and furnishings, office equipment, glues, adhesives, disinfectants, and many more.
  • Reduce gas phase contaminants to below OSHA’s TLV levels.
  • Built to meet the regulations for ventilation rates for spaces up to 1200 square feet, the BP2000 is equipped with a high quality blower motor which guarantee a very high volumetric flow rate.
  • Highly customizable, capable to eliminate a huge variety of pollutants.
  • By using various combinations of filters and 26 different chemical filtration media, the BP2000 is the air filtration system of choice against high concentrations of aldehydes, alcohols, acids, VOCs, fluorinated hydrocarbons, chlorinated hydrocarbons, alkenes and alkanes, acetates and many other chemical groups.

Call us for help with your product selection, toll free in North America, 1-800-626-0664, or fill out and send us the contact form on this page.

Have a wonderful day at the office!!

 

CSA600 Heavy Duty High Pressure Laser Fume Extractors

CSA600 Heavy Duty High Pressure Laser Fume Extractor System

Designed for heavy duty laser fume dust chemical fumes applications

  • Multi-stage filtration system: filter bag (or high capacity pleated filter),
  • medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

Contact us for help with your product selection. Call toll free, 1-800-626-0664 or fill out the contact form below.

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

Flex Arms, Articulating Arms for your SPH400, SPH800, and CSA600 Laser Fume Dust Extractor System

The units are shipped, standard feature, with a 4” diameter, 6 foot long heavy duty flex hose. Optional smaller hose collar diameters are available: 3”, 2.5”.

You may want to order your unit or units with a matching flex arm or articulating arm – here are your options:

image

image

image

Contact us for help in choosing the right Laser Fume Dust Extractor System for your needs.

Contact Us

  1. Toll Free: 1-888-395-0330 or 1-800-626-0664 (North America- Continental USA and Canada)
  2. Skype: lito.espinosa
  3. Outside of North America: 1 (514) 421-0658
  4. Contact Us Form – Click on this link to send us message
  5. Or use the contact form below – we’ll respond to your inquiry the same day

Table Top Laser Engraver Cutter Fume Odor Extractor Air Filtration

Laser and Laser Marking

LASERPURE Series – Table Top Filtration Station

  • Our new table-top design allows for Lasers whose feet up to 24″ (615mm) wide to be placed on top and exhausted via the rear to the LaserPure
  • We incorporate a pre filter section and a HEPA filter as well as an 8″ (203mm) deep chemical filter to eliminate odor and VOCs
  • The entire system is designed to be easily accessed from the front and is unique in that it incorporates our LaserBlue Gel seal that guarantees NO BYPASS of fumes
SPH1000-1.png (112289 bytes) SPH1000-2.png (146573 bytes) SPH1000-3.png (285523 bytes)

F071.png (147670 bytes)
F071
F074.png (255959 bytes)
F074
AG097.png (203498 bytes)

Call us for help in choosing the right Laser Cutter, Laser Engraver Fume, Odor, Extractor / Air Filtration System for your needs.