Laser fume extractor, marking on steel, smells quite bad

I have a machine from China. No brand. We’re marking on steel and it smells quite bad

Hello Lito
I have a machine from China. No brand. We’re marking on steel and it smells quite bad. Marking about 3 hours a day but fumes collect very quickly.
The marking table dimensions is 20″ X 16″ area.  We usually mark on the entire surface.  It’s steel coated.
I need something that has 2 heads for suction with adjustable pipe.
Please send me some options .  I prefer stronger just in case.
M W
Chief Engineer

Here’s what we recommended:

Capture-sph426

Our most popular model for light and medium duty applications, the SPH426 fume
extractor uses a multi-stage filtration system containing pre-filter, HEPA and chemical
filters (up to 50 lbs / 23 kg of chemical filtration media) and the LaserBlue gel seal which
guarantees ZERO FILTER BYPASS.

I believe the SPH426 with dual intake and two unit mounted flex arm would do the job.

SPH426 Brushed type motor fume extractor with dual intake,  and two unit mounted flex arms.

Call for us for help with your indoor air quality needs. We’d be happy to help you find relief from exposure to toxic, noxious chemical fumes, bad odors, smoke, and airborne dust particles.

Contact Us

  • Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 364-5538

Fume Extractor for small 3D printers

Meet our SPL400-3D fume extractor / air filtration system / air purifier

SPL400-3D 3D Printer Fume Extractor

SPL400-3D connected to two (2) 3D Printers

You can even hook up one of the SPL400 series to two (2) of your 3D printers – neat eh?

Features

  • Ideal for 3D Printing , AM applications generating low debris
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Specifications

  • Air Flow: 510 m³/h / 300 CFM
  • Motor(s): Motorized impellers, backward inclined, non-overloading
  • Voltage: 120V or 230V
  • Dimensions: 13″W x 16″D x 20″H / 330mm x 406mm x 508mm
  • Filter Sequence: 4″ high capacity pleated pre-filter, 30% ASHRAE (F164), 6” Medical grade HEPA Filter 99.97% (F075), 2“ Chemical filter (F072-GPC)

    More chemical filtration: 4″ high capacity pleated pre-filter, 30% ASHRAE (F164), 2” Medical grade HEPA Filter 99.97% (F074), 6“ Chemical filter (AG-GPC)

  • Optional lnlets: 3” or 4″ diameter
  • Discharge: Recirculation grille
  • Sound Level: 54 dBA at full speed
  • Remote Control: Optional
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps

Kindly contact us for more information or for help with placing your order, toll free, 1-800-626-0664 or through the contact form on this page. We will get back to you as soon as possible.

 

MedEvac Mini For Podiatry Podiatrists Nail Skin Debris Capture

MedEvac dust, debris extractor, air filtration system for podiatrist / podiatry

Mini Health Smart Portable Dust Extractor – capture nails and skin debris at source

MedEvac Mini For Podiatrist – a multi-purpose tool and air filtration system with superior pulling and filtration credentials.

Excellent in podiatry for:

  • Nail dust
  • Calluses
  • Buffing
  • Cast cutting
  • Corn debris
  • Bunions
  • Sterilizing
  • Warts
  • Grinding
  • Sanding

Capture NAIL & SKIN DEBRIS right at the source, before it migrates throughout the room. Wonderful!! Wonderfully portable and affordable too!! Yes, under $800, and that includes a source capture flex articulating arm- yes indeed!!

Benefits of a proven design:

  • High speed turbine motor blower provides efficient debris removal
  • Casters provide for mobility
  • Ultra quiet, yes, only 49dBA (at high speed, measured at 6 ft away)
  • Easily disposable bag filter surrounded by 99% efficient pleated cartridge filter ensures 100% capture of all harmful debris
  • Compact, space saving design
  • Includes flexible source capture arm to capture up to 43″ in height (12″ away from the unit)

Deluxe Model is also available, similar to above, but also includes:

  • Variable speed control
  • Microprocessor controls automatically alert you when to maintain filters & motor
  • ALSO available – Remote ON/OFF Foot Pedal (PN: AA114)

Contact us for help with your product selection or for help with placing your order– All units are factory fresh – shipped direct from the factory to your door.

TOLL FREE : 1-800-626-0664 or fill out the contact form below.

Laser Fume Extractor For Small Operation | Hobbyists | Metal Marking

Laser Fume Extractor For Small Operation | Hobbyists | Metal Marking

Ideal for low debris generating applications like metal marking
Medium pressure motorized brushless impeller motor blower, 300 CFM, 120V or 230V
Enhanced mobility with heavy duty lockable casters (wheels)
Multi-stage filtration system: pre-filter, HEPA and chemical filter
Whisper quiet operation, 54 dBA at full speed
Optional digital control panel

Laser Fume Extractor – SPL400 – ideal for small operations like Metal Marking

JUST SOME OF THE SUPPORTED POPULAR BRAND LASER MACHINES

Contact us for help with your product selection – toll free North America – 1-800-626-0664

Laser Fume Extractor for your Universal Laser Machine

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and active carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Contact us for help with your product selection.

CSA600 Heavy Duty High Pressure Laser Fume Extractors

CSA600 Heavy Duty High Pressure Laser Fume Extractor System

Designed for heavy duty laser fume dust chemical fumes applications

  • Multi-stage filtration system: filter bag (or high capacity pleated filter),
  • medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

Contact us for help with your product selection. Call toll free, 1-800-626-0664 or fill out the contact form below.

Laser Marking | Laser Engraving | Laser Cutting Fume Extractors – Brushed and Brushless

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

Brushless blower motors have a higher capacity to move air than brushed motors however do so with less static pressure.  Static pressure can be thought of as suction and is measured  in inches of water column (wc.).  Thus a low suction unit will pull water perhaps 2 inches up a pipe and no more and thus would have a static pressure of 2″wc.  High power brushless motors have a maximum measurement of 44″wc.  This makes them ideal for applications with VOCs, odors and light loads of dust.  Brushed motors on the other hand are measured at 90″wc and are ideally suited to conveying heavier smoke, heavier dust and any type of ‘sticky’ fume.  Not only do the brushed motors have more static pressure but the filters tend to last longer as the motor can continue to ‘suck’ air through dirty filters that might otherwise reduce the airflow and require changing in a brushless unit.  Brushed units are typically less expensive than the brushless units however they do require that the brushes be changed every 500-700 hours.  This is a simple procedure that takes approximately 2 minutes and the only tool required is a screwdriver.   Demonstration videos are provided for each of our products indicating how to perform this simple procedure.  Since there are many advantages to both types of blower motors many of our units are available with either type as an option.  If you have any questions or concerns about which type of blower motor is best suited for your application please call us at 1-800-626-0664 in North America or +1 514-421-0658 internationally to discuss it with one of our experts.

Brushless blower motors:

Pros

  • The most powerful at moving air, up to 300 CFM
  • Require no maintenance

Cons

  • Maximum static pressure 44″ wc
  • Expensive
  • Filters require more frequent changes with heavier types of dust.

Call for help with model selection – 1-800-626-0664

Quatro Air SPH-82B5 Brushless laser solder odor fume extraction system

Dust, particle, odor, chemical fumes, smoke air filtration, source capture applications

We are pleased to offer the following SPH-800 series laser fume extraction system for your air filtration application as described below:

image

SPH-800 Series  Fume Extractor Specifications:

•   Heavy gage welded Steel Construction
•   Powder coated standard Quatro white
• Standard inlet dual 4” (100 mm) diameter hose collars, optional single
or dual 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 3”(75mm)
•   Discharge grills located underneath system
•   Maximum Airflow 534 CFM (252 l/sec)
•   Maximum static pressure capability 44”w.c. (11 KPa)
•   Whisper quiet operation 54 dBA
•   (2) CSA/UL approved 1100 Watt brushless type blowers
•   Model SPH-82B5, 230 volt ONLY single phase, 12 amps
•   Blowers are complete with thermal cut-outs
•   6’ (2 meter) electrical cord set

Filter sequence supplied with system:

o (2) Multi layered dual inlet knock out pad
o (2) 30% ASHRAE rated pleated filter
o (2) 99.97% on 0.3 microns certified medical grade HEPA filter
o (2) 8” deep general purpose chemical filter module

image

•   Easy tool less filter change out
•   6’ (2 meters)of heavy duty industrial hose
•   Limited one year warranty
•   Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
•   Approximate operating weight is 150 lbs (68 kg)

Contact Us

  • Toll Free:
    1-888-395-0330 or
    1-800-626-0664 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 421-0658

Laser Fume Extractor | Morntech (MT- L1290)

A prospective client, who we happily supplied with the matching air filtration system / Laser Fume, Laser Cutting, Laser Engraving Dust, Odor, Fume Extractor system, initially wrote:

Hello,

I contacted you via phone earlier today regarding an air filtration system. According to the head of our tech department this should be compatible with the Morntech (MT- L1290) that we have ordered. The specifications are listed in the right column of the chart below.

Thanks,

Tracy L

Our SPH-426 (SPH-400 series) was the perfect match for their Morntech (MT- L1290) laser cutting, laser engraving machine. Just to mention other brands of Laser cutters, Laser markers, Laser engravers- we’ve matched our Laser Fume, Dust, Odor Extractors with:

List of supported lasers

Laser and Laser Marking

SPH-400 – Multi Purpose Filtration Station

Description

  • Our most popular unit for small to medium duty laser applications
  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications
  • We offer single or dual inlet lids with multiple diameter inlets as well as extended lids with either top or bottom intakes for customers using these units under tables. In total we have 18 different lids, ask us about your application!
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended

SPH400-2.png (115228 bytes) SPH400-3.png (182238 bytes) adj_ext_arm_02.JPG (14999 bytes) adj_ext_arm_01.JPG (26274 bytes) extraction_arm.JPG (51083 bytes) iseries_ctl_pnl.JPG (99352 bytes)

For help in choosing the right clean air solution for your needs –  Call us, toll free: 1-800-626-0664 (Most of USA and Canada), +1-514-421-0658 (outside of North America), Skype: lito.espinosa or fill out the Contact Form below.

Laser Fumes, Odor, Dust, Particle Extraction Filtration

     The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications     With large collection bag, HEPA Filter & Deepbed Odor filters     LaserBlue Gel seal guarantees NO BYPASS     Dual hi-speed turbine for high suction, pressure & airflow     Whisper quiet operation is office friendly     Universal design allows for 2.5", 3", 4" inlet along with discharge


The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications
With large collection bag, HEPA Filter & Deepbed Odor filters
LaserBlue Gel seal guarantees NO BYPASS
Dual hi-speed turbine for high suction, pressure & airflow
Whisper quiet operation is office friendly
Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Cutting, engraving, using a Laser Cutter, Laser Engraving machine can produce nasty, unhealthy chemical fumes, odors, smoke, dust. Reduce your exposure to these health hazards – capture close to the source of these pollutants.

Whether you are using any of the following or other brands of Laser Cutter, Laser Engraving machine / equipment, we have a Fume, Smoke, Dust Extractor / Air Filtration System / Air Purifier for your needs:

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Call us toll free, 1-800-626-0664, outside of North America, +1514-421-0658, Skype:lito.espinosa – you can also fill out the contact form below.