Air Filtration Systems for Data Centers

High Efficiency Air Filtration Systems, Air Scrubbers, Air Purifiers For Data Centers

Telecommunications, Electronic control rooms (pulp & paper, petrochemical, manufacturing, etc.), High tech industry (chip manufacturing, process rooms, etching areas)

Data centers are dynamic environments where maintenance operations, infrastructure upgrades, and  equipment  changes  take  place  regularly,  leading  to  possible  introduction  of  airborne contaminants. Data centers also house other contaminants, such as chlorine, that can be emitted from PVC insulation on wires and cables if temperatures get too high.

Corrosive Environment Protection – Corrosion of contacts and components on circuit boards accounts for 30 to 40% of all equipment failures. The eCorrosion is caused by an unmanaged environment consisting of combinations of uncontrolled temperature and humidity, along with harmful corrosive gases inside the electronic equipment rooms. Early life failures due to eCorrosion could result in unplanned warranty, and other maintenance and replacement related costs.

Visit our webpage : http://www.airpurifiers-r-us.com/data-centers-air-purifiers.html

Feel free to contact us, toll free, at 1-800-626-0664 or complete and send us the contact form below:

Advertisements

A BP2000 Pro series air filtration system you can hang from the ceiling

Yes, the BP2000H, can be, ceiling suspended, wall mounted

If floor space is a premium

If floor space is a premium, the BP2000 PRO series air filtration system, air scrubber, comes in a ceiling suspended, hung from the ceiling, or wall mounted configuration.

Whether you are trying to remove dust, odor, dust and odor, we have a filter configuration just right for your needs.

Please note that, unlike the Upright BP2000 PRO series, the BP2000H can be operated horizontally or vertically (upright position).

capture-bp2000h

Multi-stage Filtration : Chemical, Odor, Airborne Particles

The 5-stage filtration system offers enhanced protection against a wide range of airborne pollutants including chemical compounds, gases, odors and particles- dust, pollen, microscopic particles, chemicals, gases, VOCs.

Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP2000H delivers superior air quality for virtually any application that requires removal of chemicals, vapors and particles.

Visit our webpage for the BP2000H Series air filtration system, point your browser to http://www.airpurifiers-r-us.com/bp2000-horizontal.html

Call us, toll free, 1-800-626-0664, for help with your product selection or for more information. You may also complete and send us the contact form below:

Maintain negative pressure as well as guarantee a minimum of 12 air changes

In less than 15 minutes and transform a room into an emergency negative pressure environment

cover-medicairThe MedicAir Air Filtration System is a highly efficient air purification system that can be deployed in less than 15 minutes and transform a room* into an emergency negative pressure environment.

SAFETY FEATURESpasted20image20490x386

  • Inlet to the system is at breathing zone level in an attempt to capture viruses as soon as possible
  • Fans are located on the clean side of the HEPA filter ensuring a clean fan/motor/control section
  • Heavy Duty rubber lockable casters
  • Laser BlueGel: Sealant system guarantees zero filter by -pass
  • Two ports to allow for easy in place decontamination  with vented paraformaldehyde and ammonium  bicarbonate
  • Visual and Audible control system
  • Controls are access code protected making them virtually tamper proof
  • In addition to HEPA filtration , germicidal UV lights are used to help kill the viruses before being exhausted
  • Two extended surface certified HEPA filters are used to minimize pressure drop, noise and filter life cycle
  • CSA (US) Approved to medical standard

Visit the MedicAir webpage at http://www.airpurifiers-r-us.com/medicair-hospital-isolation-room-air-filtration.html

Call us, toll free, 1-800-626-0664, for more information, or fill out and send us the Contact Form below:

 

Air purifier, air cleaner for getting rid of marijuana, cannabis, pot, weed smoking odor

In case you haven’t heard the news, smoking of pot, grass, weed, cannabis, marijuana for recreational and medicinal use, is now legal in Canada.

shallow focus photography of cannabis plant

Photo by Michael Fischer on Pexels.com

While you may enjoy the benefits of smoking pot, grass, marijuana, in your apartment or condo, whether it be for recreational or medicinal use, the pungent aroma produced could be bothersome and a nuisance to your neighbor.

We at airpurifiers-r-us.com offer a wide range of air filtration solution which could be helpful in maintaining a good and cordial relationship with your neighbors 😉

Feel free to call us for help with choosing the right air filtration system, air purifier for your needs.

Call toll free, 1-800-626-0664, visit our website at https://www.airpurifiers-r-us.com, or fill out and send us the contact form below.

Remember, driving while intoxicated or high, is not only un-cool, but it is against the law.

Have a wonderful day!!

Air Purifiers for Volcanic Vog, Volcanic Smog

Extreme Air Purifier for Volcanic Smog

BreathEasy BP PRO series and BH series (home, office, small spaces) air filtration systemsbh-airflow are our air purifying units configured specifically to adsorb the dangerous chemicals, gases and toxic particles emitted from volcanic smog, or VOG. When Sulphur dioxide and other gases and particles are emitted by an erupting volcano that react with oxygen and moisture in the presence of sunlight this forms volcanic smog and fog.

A special blend of chemical media provides increased chemical filtration, which is ideal for residents and businesses located within 100 miles of a volcano.

So, What is VOG exactly ?

Volcanic smog or VOG is formed when sulfur dioxide and other pollutants from an active volcano react with oxygen, moisture, dust and sunlight. This creates a dangerous mix of airborne pollutants that can penetrate deep into the lungs and irritate the tissues and mucus membranes of the eyes, nose and throat. The long-term effects of breathing in volcanic smog are unknown.

Call us for help with your product selection, toll free: 1-800-626-0664, Skype: lito.espinosa, or fill out and send the contact form below.

air filtration unit for our once-a-dairy-lab-now-an-anatomy-lab cadaver cooler

A customer wrote:

Hello, Lito!  Our family members with MSU’s WIMU program, along with MSU’s Safety and Risk Management office, suggested I contact you for getting a similar air filtration unit for our once-a-dairy-lab-now-an-anatomy-lab cadaver cooler in Linfield Hall.

For your ‘entertainment’ you can read this email string. Or not.  I look forward to hearing back from you as to what comes next in the way of making this purchase.

Thanks!

S

Our BP PRO series air filtration systems, the BP1000 and the BP2000, with the 12 inch

capture-bp2000-features

BP2000 Series Air Filtration System

chemical filter modules, available with a customizable chemical media blend, can help reduce your exposure to harmful chemical gases.Read more about our BreathEasy PRO series air filtration systems, air purifiers – click on http://www.airpurifiers-r-us.com/breatheasy-pro-commercial-industrial.html

Call us for help with your product selection, toll free, 1-800-626-0664, Skype us: lito.espinosa, or fill out the contact form below.

Thanks and have a wonderful day!

 

Fume Extractors for 3D Printing, Additive Manufacturing Technologies, AMT

Looking for fume extractor and / or an air filtration system solution to your 3D printing, AM application? We’ll be happy to assist you. Call us toll free, 1-800-626-0664 from anywhere in North America or +1-514-364-5538 outside of the Continental US and Canada.

You can also use the contact from below – we will get back to you as soon as possible.
Screen Shot 2017-08-14 at 1.47.09 PM

Learn more about 3D Printing aka AM (Additive Manufacturing):

3D printing, also known as additive manufacturing (AM), refers to processes used to create a three-dimensional object[1]in which layers of material are formed under computer control to create an object.[2] Objects can be of almost any shape or geometry and are produced using digital model data from a 3D model or another electronic data source such as an Additive Manufacturing File (AMF) file. STL is one of the most common file types that 3D printers can read. Thus, unlike material removed from a stock in the conventional machining process, 3D printing or AM builds a three-dimensional object from computer-aided design (CAD) model or AMF file by successively adding material layer by layer.[3]