Air Filtration System, Air Purifier, To Reduce Your Exposure To The Health Hazard Brought By Smoke, Chemical Gases, Odors, Airborne Particles, VOCs, From Forest Fires

MULTI-STAGE FILTRATION SYSTEMS
HEPA + CHEMICAL FILTRATION

6230B89C-DCD5-43B6-9419-5F296CB0E82F

99.97% Certified HEPA Filters: Are very effective against viruses, bacteria, fungal spores and very fine particles
Refillable chemical filters: Contain carefully engineered filtration media blends to remove gases, odors, chemical vapors and volatile organic compounds (VOCs).

Powerful, compact and very portable, the BH Series air purifier

Powerful, compact and very portable, the BH Series air purifier is an excellent choice for localized chemical, odor and particle removal.

BH Series is an affordable and low maintenance general purpose air purifier for single rooms or small spaces.

capture_bh400

Recirculation unit: Continuously recirculating the indoor ambient room air through a multi-stage air filtration system, removing airborne contaminants every time the air passes through the unit. The higher the number of air changes per hour (ACH), the cleaner the air will be.

99.97% Certified HEPA Filters are very effective against viruses, bacteria, fungal spores and very fine particles

Refillable chemical filters contain carefully engineered filtration media blends to remove gases, odors, chemical vapors and volatile organic compounds (VOCs).

The BH Series is also available in a Horizontal Orientation, same choice of filter configurations to match your needs and and application, can be wall mounted, ceiling suspended, or on the floor with wheels for mobility.

Designed to handle high concentrations of chemicals, gases, odors, particles

Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP2000 delivers superior air quality for residential and commercial spaces, office, healthcare facilities, clinics, labs, buildings and any workshops or production facilities that require effective air filtration.

The standard configuration for BP2000 is standalone unit for general air purification. For virtually any application that requires removal of chemicals, odors, fumes, vapors and particles. http://www.airpurifiers-r-us.com/assets/bp2000_salessheet_v07_lores-4.pdf

Contact Us

FUME EXTRACTOR FOR SMALL 3D PRINTERS

Quatro Air SPL400-3D

CB870684-FC90-457B-A90F-3B56BBF51085

Features

  • Light duty fume extractor for Laser engraving, marking, and AM applications (3D Printing)
  • Low-profile, space saving design
  • Multiple filter arrangement allows for disposable bag, HEPA cartridge and gas phase filter
  • Built in whisper quiet features
  • Custom chemical filters can be incorporated to deal with specific gas phase contaminants
  • Optional digital control panel

PDF spec sheet / pricing : http://www.airpurifiers-r-us.com/assets/spl400-3d1-usd-%24-list-2.pdf

Contact Us

Mobile and powerful source capture fume extractor for welding applications

ABCBD93A-0DA8-4428-93F4-ECD0BC0AF0E8The highly-efficient multi-stage filtration system includes: internal aluminum mesh spark arrestor, pre-filter wrap, washable filter for sub-micron particles down to 0.2 microns, capture tray for larger particles and optional carbon filter. The washable cartridge filter reduces the need for frequent filter replacement and minimizes operating costs. Easy access to the filtration system allows the user to perform any maintenance task without any formal training.

Maneuverability – Heavy-duty casters allow for easy movement between work areas, Filter Life – Cleanable / washable cartridge filter reduces operational costs, Extended Fume Capture Area – 360-degree, easy to operate, low resistance extraction arms (7’ or 10’), Increased Productivity, High capacity debris tray and tool-free filter replacement reduce downtimes, Quiet Operation, Only 58 dBA and additional sound attenuation available if required.

Call us for help with your product selection, toll free, 1-800-626-0664, or complete and send us the contact form below.

SPH400, SPH426, Not Your Ordinary Laser Fume Extractor, Air Filtration System

Our most popular model Laser Fume Extractor for light and medium duty applications

The SPH400 series Laser Fume Extractor, Air Filtration System, is our most popular model for light and medium duty applications. It’s made here in North America, in Pointe-Claire, Quebec, Canada but has found its way to shops, labs, offices, workplaces around the world.

Here’s why.

4 stages, multi-stages of filtration

Capture-PF400-PF800

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

Same type of filter that is used in hospital operating rooms

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

Odors, Fumes – gas phase filter is quite large and 8” deep

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

Ideal at removing many VOC’s

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

A gel seal material to guarantee zero by-pass

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

High pressure blowers to overcome the resistance created by the deep bed chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

JUST SOME OF THE SUPPORTED POPULAR BRAND LASER MACHINES

For more information, visit our webpage at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html or contact us using the contact form below.

Air Purifiers for Volcanic Vog, Volcanic Smog

Extreme Air Purifier for Volcanic Smog

BreathEasy BP PRO series and BH series (home, office, small spaces) air filtration systemsbh-airflow are our air purifying units configured specifically to adsorb the dangerous chemicals, gases and toxic particles emitted from volcanic smog, or VOG. When Sulphur dioxide and other gases and particles are emitted by an erupting volcano that react with oxygen and moisture in the presence of sunlight this forms volcanic smog and fog.

A special blend of chemical media provides increased chemical filtration, which is ideal for residents and businesses located within 100 miles of a volcano.

So, What is VOG exactly ?

Volcanic smog or VOG is formed when sulfur dioxide and other pollutants from an active volcano react with oxygen, moisture, dust and sunlight. This creates a dangerous mix of airborne pollutants that can penetrate deep into the lungs and irritate the tissues and mucus membranes of the eyes, nose and throat. The long-term effects of breathing in volcanic smog are unknown.

Call us for help with your product selection, toll free: 1-800-626-0664, Skype: lito.espinosa, or fill out and send the contact form below.

Fume Extractor, Light Duty, Multi-station, multi-user configuration with optional capture arms

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller, Enhanced mobility with heavy duty lockable casters, Multi-stage filtration system: pre-filter, HEPA and chemical filter, Whisper quiet operation,  Optional digital control panel

  • Air Flow: 1100 m³/h / 475 CFM
  • Motor/fan: Backward inclined, non-overloading, brushless
  • Voltage: 120V or 230V
  • Dimensions: 15″W x 23″D x 30″H / 381mm x 585mm x 762mm
  • Filter Sequence: Pleated pre-filter, 30% ASHRAE (F265), Medical grade HEPA Filter 99.97% (F057), Chemical filter (F033-GPC)
  • Optional lnlets: 2×3”, 3×3” or 4×3″
  • Discharge: Recirculation grille; optional silencer (H250]
  • Sound Level: 62 dBA at full speed
  • Remote Control: Optional
  • Suction hose: 6 feet (2m) of heavy duty hose & clamps
soldering-spm504

Ideal for up to 4 workstations, Medium pressure motorized brushless impeller

Kindly contact us for help with your product selection, pricing, and / or help with ordering, Toll free: 1-800-626-0664.

You may also use the contact form on this page. Have a wonderful day!! 🙂

Single Station Solder Fume Extractor

Meet our DCS (Desktop Containment System)

People can become permanently sensitized to solder fumes. As a result continued exposure may cause asthma and other respiratory health issues depending on the amount of exposure. Employees should be protected from these health risks by using the best fume extraction systems available.

Possible health symptoms due to soldering smoke

headaches, fatigue, irritability, constipation, nausea, stomach pains, amnesia, dizziness, loss of weight

Continued uncontrolled exposure could cause far more serious symptoms such as: kidney damage, nerve and brain damage, cancer

dcs

We have a wide range and models of fume extractors for solder fume extraction, removal, and other soldering applications. More over here

Notable features of our DCS fume extractor for soldering application:

Protects operators from harmful chemicals, vapors and particulates, Illuminated interior provides a clear and bright work environment, Quiet operation, digital control panel with audible and visual alarms, Standard filter sequence: pre-filter, chemical filter and HEPA filter, Custom filter sequences available for custom applications, Adjustable hinged acrylic front door allows for great visibility

Call us for help with your solder fume extraction, air filtration solution needs, toll free, 1-800-626-0664 or using our contact form below. We’ll get back to you soon as possible.