Category Archives: Laser Engraving, Laser Marking, Laser Cutting

05.11.24
by

SPH426 Fume Extractor for Laser Marking, Engraving, Cutting

Introducing the SPH426 Fume Extractor by Quatro Air

STANDALONE FILTERED EXHAUST

This is a self contained unit, that connects to the laser engraver via flexible heavy duty grounded hose that is provided. The inlet diameter can accommodate a 2″, 3″ or 4″ collar hose connection.

Discharge is recirculated back into the room via vents at the bottom of the system. However, there is an optional side collar adapter kit to allow venting to the exterior if required. The unit is very quiet, and takes up very little floor space (approx. 1.25 sq. ft.)At 30 inches high the unit is ideal to be tucked under a table. This can save precious floor space. If required, the entire system is easily relocated via industrial grade casters on the bottom of the exhaust unit. All the filter elements can be replaced without the need for tools in very short order. The inexpensive filters make this an economical solution for most end users.  

Installation – Easily Assembled, requires no tools

This unit is easily assembled, requires no tools, no need for a technician. The deep bed chemical filter allows for maximum VOC removal.  The chemical filter is lowered in from the top lid. The 99.97% HEPA filter guarantees the removal of particles as small as 0.3 microns in diameter.

| Learn More |

05.07.24
by

CSA 600 Laser Fume Extractor

Designed for large  Laser cutting, marking, engraving and AMT systems

The CSA 600 Fume Extractor series is the ideal solution for heavy duty laser applications

FEATURES:
Designed for large Laser cutting, marking, engraving and AMT systems
Multi-stage filtration system: filter bag (or high capacity pleated filter), medical grade HEPA and chemical filter
Refillable, 15” deep chemical filter module, up to 66 lbs. (30kg)
LaserBlue gel seal guarantees ZERO FILTER BYPASS
Dual high speed turbine for high suction, pressure and airflow
Office friendly, whisper quiet operation
Digital control panel
Enhanced mobility with heavy duty lockable casters

| Learn More |

Contact us:

05.01.24
by

Front filter access fume extractors, dust collectors

Easy access to your filters – easy filter changes

| Find out more |

03.31.24
by

Hospitals, Isolation Room, Negative Pressure, Infection Control areas

When an emergency situation arises, there is no time to waste. Working closely with healthcare professionals allowed us to understand their strict requirements and design a highly efficient air purification system that can be deployed in only a few minutes and transform a room into an emergency negative pressure environment.

BP1000 series, versatile, multiple purpose air purifiers, air filtration systems

Available in various configuration and filter sequence – check it out – https://www.air-filtration-systems.com/Dust-Particle-Control.html

Request a Quote – https://www.air-filtration-systems.com/Contact.html

Have a wonderful day!

12.23.23
by

Wishing You All A Joyful Christmas And A Wonderful New Year!!

Multi-Purpose Air Filtration Systems, Air Purifiers, Air Cleaners, Air Scrubbers – Dust and Chemical Fumes, Gas, Odor Removal And / Or Reduction

Contact us for help with product selection, pricing, ordering, Toll free (USA and Canada), 1-800-626-0664, Outside of North America call 1-514-219-0658, or use the form below:

11.09.23
by

Functional, affordable, articulating extraction arms for your fume, dust extractor

Tapered Nozzle, Round Nozzle, 4″ diameter, Clear (Plexi-Cone) Nozzle, 8″ diameter, Extraction arm is 24″ (2 feet) long, Slide-valve

Black articulating flex arm for source capture, dust collector, fume extractor, air filtration system: tapered nozzle, round nozzle, clear capture cone nozzle, table mounted, unit mounted

https://www.airpurifiers-r-us.com/fume-extractor-system-articulating-arms-2.html

Contact us for more info, pricing, ordering, call, toll free in US and Canada, 1-800-626-0664 or fill out and send us the form below:

11.08.23
by

Compact and maneuverable extraction arm

For any application that requires localized removal of dust, particulate matter, hazardous chemicals, fumes, gases, and vapors

Compact and maneuverable extraction arm for any application that requires localized removal of dust, particulate matter, hazardous chemicals, fumes, gases, and vapors. The arm can be installed directly to the table of through a clamp holder to the tabletop or wall. The self-adjustable frictional joints and swivel allow users to set the arm in the most convenient work position.

Contact us for pricing, availability , etc. – https://www.airpurifiers-r-us.com/index.html

11.07.23
by

Laser Fume Extractors, Sticky Smoke, Dust, Chemical Odor Removal

Toxic, carcinogenic corrosive or extremely odorous contaminants

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and active carbon modules.

We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Zero bypass to any fumes, odors and VOCs

We are proud to introduce our new breakthrough technology. We call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it’s elasticity, it allows zero bypass to any fumes, odors and VOCs. It’s NON toxic and NON porous as well.

SPH400 Various Lid Options – Versatile fume and dust extractors

Contact us for help with product selection, more info, pricing, etc. using the form below, or call – Toll free in the US and Canada 1-800-626-0664:

08.21.23
by

Pre-filter modules for your Laser Fume and Dust Extractor

Sticky Smoke and Premature clogging

Who needs it?

Customers that have heavy dust loading will appreciate this pre-filter section since it will prolong the life of the primary filters inside the SPH800/SPH400 extractors, reducing the maintenance costs.

What’s inside?

The PF801/PF401 modules contain three (PF801) or two (PF401) high-capacity antimicrobial, multi-layered, dust filter bags that can capture a significant amount of dust and particulate matter before it reaches the primary filters of the SPH800/SPH400 units.

Read more about it https://www.airpurifiers-r-us.com/pf400-laser-fume-extractor-prefilter-section.html

Contact us for help with product selection, pricing, help with ordering:

02.10.23
by

Fume and Dust Extractor, Air Filtration System Auto Flow Feature

Auto Flow

“AUTOFLOW” is an automatic system pressure compensation system. After setting the minimum speed required to properly evacuate your equipment, the controls will automatically increase the motor speed to compensate for the increased pressure as a result of filters getting dirty or a system blockage until maximum speed is reached. After a filter change, system will automatically decrease the speed to the original set point.

SPH800 FUME EXTRACTORS FOR HIGH VOLUME LASER CUTTING, MARKING, ENGRAVING & AM SYSTEMS
Download PDF Brochure / Specification Sheet – Brushed Type Motor / Blower Version : https://www.airpurifiers-r-us.com/assets/specsheet-sph835.pdf

Contact us for help with product selection, information, pricing, quotation: