Two Epilog Zing Laser Machines, Cutting Plywood and Acrylic

Laser Fume Extractor Solution

Two Epilog Zing Laser Machines, Cutting Plywood and Acrylic

Capture-PF400-PF800

You will need one SPH426 (with PF401A) for each machine.

The alternative is one SPH82B5 (brushless motor ), $5330.00 with the PF801A ($830.00) pre-filter module.

JUST SOME OF THE SUPPORTED POPULAR BRAND LASER MACHINES

Air Purifier, Brushless, Bagless, and Maintenance Free Industrial Motor

Excellent for EVERYTHING: Aluminous oxide, sand, quartz, glass beads, gypsum, die-stone, ceramic alloys, acrylics, resins, etc

0FA69D2F-F04E-4C06-BF8E-6C3EA228223B

  • “A-Mile-A-Minute High Performance Brushless Dust Collection
  • Unique sub-micron dust collection filtration down to 0.3 microns
  • “Slide & Glide” Rejuvenating Cartridge Filter System
  • Brushless, Bagless, and Maintenance Free Industrial Motor
  • No brushes or filter bags to change and replace
  • Comprehensive Extended Two Year Warranty Protection
  • Pre-Filter Collector & Odor Exhaust Filter upgrade features available
  • Available in a configuration with both air intake grill and clean air exhaust grill – optional flex hose collars, 1 x 6″ diameter, 1 x 8″ diameter or 2 x 6″ diameter, 2 x 8″ diameter
  • Velocity X4 delivers up to 600 CFM of air moving capability
  • Whisper quiet performance, 54dBa
  • Available in 120 or 230 volts single phase, 50 or 60 Hz

More on the Velocity X4 – http://www.airpurifiers-r-us.com/velocity-x4-cr.html

Call us toll free 1-800-626-0664 for help with your product selection or for placing your order. You can also send us a completed contact form below:

Pre-filter module for your laser fume extractor

Are you consuming, replacing your main filters, chemical odor filter, HEPA filter, sooner rather than later?

Sticky smoke

is what we sometimes call the by-product when cutting or engraving on resinous materials such as acrylic, wood, materials with adhesive backing, etc. They consume filters sooner rather than later.

Here’s where our Pre-filter modules that can be added on our Laser Fume Extractors or ordered as a stand-alone to complement your existing laser fume extractor / air filtration system.

Designed to enhance the performance of the SPH800/SPH400 air purifiers, the PF801/PF401 passive pre-filter modules capture larger dust and particles protecting the air purifier’s HEPA and/or carbon filter.

D68852A3-5F29-41AA-AB7B-B263E0E01E78

The PF801/PF401 passive pre-filters can be used either as add-on modules to an SPH800/SPH400 air purifier or as standalone mobile units. The standalone modules, can be used with virtually any existing filtration system. The inlet and discharge collars can accommodate many different arrangements to suit the application. Single or dual 1”, 1.5”, 2”, 2.5”, 3” or 4” diameter collars are available as standard options. Custom diameters are available upon request.

Contact us for more information – go on to our contact tab or send us a completed contact form below:

Premature clogging of main filters – HEPA filter and the Odor Filter / Chemical Filter

Laser cutting with wood produces “sticky smoke”

The CSA600 series Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:
• The unit contains Merv 13 Bag filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

CSA-600 - Heavy Duty Dust & Odor Removal

The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications With large collection bag, HEPA Filter & Deepbed Odor filters LaserBlue Gel seal guarantees NO BYPASS Dual hi-speed turbine for high suction, pressure & airflow Whisper quiet operation is office friendly Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

• The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
• This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.
The gas phase filter is quite large and 15” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.
• Depending on the type of media the modules could weigh as much as 70 lbs.
• Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
• This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
• The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter
Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure allowing us to continue to evacuate the laser chamber. The system is equipped to advise you when the filters need to be changed.

Contact us for help with your Laser Cutting, Engraving Fume Extraction System needs:

Call us toll free in North America 1-800-626-0664 or fill out the contact form below.

Thanks and have a great day!!

Nail Salon | Spa | Clean Air Solutions | Dust and Odor Removal

Nail Salon – Spa – Dust – Odor – Removal – Clean Air Solutions

For your clean air solution in your nail salon, spa, podiatry clinic (podiatrists who make house calls) – fine dust, odor removal and air filtration – we can help.

Our air filtration systems are portable, have casters for mobility, prudently priced, affordable, won’t break your bank account. 🙂 These units are well engineered, well designed, superbly fabricated and built with TLC.

Give us a call for help with your clean air solution – we can help with your product selection. Call toll free, in North America, 1-800-626-0664 – or fill out the contact form below.