Heavy Duty Fume Dust Extractor Air Filtration System

Designed for heavy duty laser fume dust chemical fumes applications

Check it out: http://www.airpurifiers-r-us.com/csa600-heavy-duty-fume-dust-extractor-system.html

CSA600 Heavy Duty Laser Fumes Dust Odor Extractor Air Filtration System

  • Multi-stage fitration system: filter bag (or high capacity pleated filter),
    medical grade HEPA and chemical filter
  • Refillable, 15” deep chemical filter module, up to 66 lbs (30kg)
  • LaserBlue gel seal guarantees ZERO FILTER BYPASS
  • Dual high speed turbine for high suction, pressure and airflow
  • Office friendly, whisper quiet operation
  • Digital control panel
  • Enhanced mobility with heavy duty lockable casters

Laser Marking | Laser Engraving | Laser Cutting Fume Extractors – Brushed and Brushless

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

Brushless blower motors have a higher capacity to move air than brushed motors however do so with less static pressure.  Static pressure can be thought of as suction and is measured  in inches of water column (wc.).  Thus a low suction unit will pull water perhaps 2 inches up a pipe and no more and thus would have a static pressure of 2″wc.  High power brushless motors have a maximum measurement of 44″wc.  This makes them ideal for applications with VOCs, odors and light loads of dust.  Brushed motors on the other hand are measured at 90″wc and are ideally suited to conveying heavier smoke, heavier dust and any type of ‘sticky’ fume.  Not only do the brushed motors have more static pressure but the filters tend to last longer as the motor can continue to ‘suck’ air through dirty filters that might otherwise reduce the airflow and require changing in a brushless unit.  Brushed units are typically less expensive than the brushless units however they do require that the brushes be changed every 500-700 hours.  This is a simple procedure that takes approximately 2 minutes and the only tool required is a screwdriver.   Demonstration videos are provided for each of our products indicating how to perform this simple procedure.  Since there are many advantages to both types of blower motors many of our units are available with either type as an option.  If you have any questions or concerns about which type of blower motor is best suited for your application please call us at 1-800-626-0664 in North America or +1 514-421-0658 internationally to discuss it with one of our experts.

Brushless blower motors:

Pros

  • The most powerful at moving air, up to 300 CFM
  • Require no maintenance

Cons

  • Maximum static pressure 44″ wc
  • Expensive
  • Filters require more frequent changes with heavier types of dust.

Call for help with model selection – 1-800-626-0664

Downdraft Station Air Filtration System for Dust and Chemical Odor Filtration

Downdraft Station | Space-Saving Air Filtration System

Advanced protection from harmful chemicals and particulates

For a wide range of applications :

Downdraft Station | Space Saving Air Filtration System for Dust and Chemical Odors

chemical fumes, powder, fine dust removal, solvent vapor fumes, pharmaceutical powder filling, compounding, light grinding dust, acid gas fumes, anesthesia gas containment, epoxy fumes, and many more.

Powered by an ultra-quiet brushless motor and a multi-stage filtration system, the DDS Downdraft Station removes harmful particles from the work area and helps you maintain a clean and healthy workplace.

For restricted spaces, the Low Profile Configuration allows the system’s containment hood to be installed on the workbench and connected to the top or the back of the Multi-stage Filtration Unit via flexible hose.

Available Configurations

Stand-alone:Downdraft Station Air Filtration System - Low profile, with ClearView Containment Hood

  • 45.5″H (1155mm) x 16″W (406mm) x 17.9”D (455mm)

Low Profile:

  • ClearView Containment System
    14.5″H (368mm) x 15″W (381mm) x 15”D (381mm)
  • Multi-stage Filtration Unit
    32″H (813mm) x 16″W (406mm) x 13”D (330mm);
    High Intensity LED Bracket (optional)

Contact us for help with your product selection – 1-800-626-0664 or fill out the contact form below.

Printing | Graphic Art |Ink fumes odors toner dust airborne particulates

BP2000 – BP1000 – BP600 Series – Industrial Grade Air Purifier

Invest in any of our BreathEasy PRO series air filtration systems, air purifiers to help reduce your exposure to dust and chemical fumes and odors.

Depending on the size of the room, we have a standalone recirculating system to fit your needs. Our air filtration systems are prudently priced, so are the replacement filter and parts to keep them running effectively and efficiently.

Our BreathEasy PRO series can provide air recirculation for both dust control (HEPA filters capture 99.97 % of particles as small as 0.3 micron) as well as VOC and odor control.  As most large format printers are aware, off-gassing from the print material doesn’t stop the instant that the material has printed.  The BP PRO series air purifiers have been shipped to thousands of print houses around the world.

Designed to handle high concentrations of chemicals, gases, odors, particles and biological
contaminants, the BP2000 delivers superior air quality for residential and commercial spaces,  office buildings and any workshops or production facilities that require effective air filtration.

The standard configuration for BP2000 is a standalone recirc air filtration unit. For virtually any application that requires removal of chemicals, vapors and particles directly at the source,  BP2000’s  wide selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants before they spread into the environment.

| Fine Particulate Control | Large Particles Control | Light Odor Control Capabilities | Heavy Odor Control Capabilities |

Contact Us

Quatro Air SPH-82B5 Brushless laser solder odor fume extraction system

Dust, particle, odor, chemical fumes, smoke air filtration, source capture applications

We are pleased to offer the following SPH-800 series laser fume extraction system for your air filtration application as described below:

image

SPH-800 Series  Fume Extractor Specifications:

•   Heavy gage welded Steel Construction
•   Powder coated standard Quatro white
• Standard inlet dual 4” (100 mm) diameter hose collars, optional single
or dual 1.5”(38mm), 2”(50mm), 2.5”(127 mm), 3”(75mm)
•   Discharge grills located underneath system
•   Maximum Airflow 534 CFM (252 l/sec)
•   Maximum static pressure capability 44”w.c. (11 KPa)
•   Whisper quiet operation 54 dBA
•   (2) CSA/UL approved 1100 Watt brushless type blowers
•   Model SPH-82B5, 230 volt ONLY single phase, 12 amps
•   Blowers are complete with thermal cut-outs
•   6’ (2 meter) electrical cord set

Filter sequence supplied with system:

o (2) Multi layered dual inlet knock out pad
o (2) 30% ASHRAE rated pleated filter
o (2) 99.97% on 0.3 microns certified medical grade HEPA filter
o (2) 8” deep general purpose chemical filter module

image

•   Easy tool less filter change out
•   6’ (2 meters)of heavy duty industrial hose
•   Limited one year warranty
•   Dimensions: 16” x 25” x 30” High (406mm x 635mm x 760mm High)
•   Approximate operating weight is 150 lbs (68 kg)

Contact Us

  • Toll Free:
    1-888-395-0330 or
    1-800-626-0664 (North America- Continental USA and Canada)
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 421-0658

Laser Fumes, Odor, Dust, Particle Extraction Filtration

     The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications     With large collection bag, HEPA Filter & Deepbed Odor filters     LaserBlue Gel seal guarantees NO BYPASS     Dual hi-speed turbine for high suction, pressure & airflow     Whisper quiet operation is office friendly     Universal design allows for 2.5", 3", 4" inlet along with discharge


The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications
With large collection bag, HEPA Filter & Deepbed Odor filters
LaserBlue Gel seal guarantees NO BYPASS
Dual hi-speed turbine for high suction, pressure & airflow
Whisper quiet operation is office friendly
Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

Cutting, engraving, using a Laser Cutter, Laser Engraving machine can produce nasty, unhealthy chemical fumes, odors, smoke, dust. Reduce your exposure to these health hazards – capture close to the source of these pollutants.

Whether you are using any of the following or other brands of Laser Cutter, Laser Engraving machine / equipment, we have a Fume, Smoke, Dust Extractor / Air Filtration System / Air Purifier for your needs:

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Call us toll free, 1-800-626-0664, outside of North America, +1514-421-0658, Skype:lito.espinosa – you can also fill out the contact form below.

in less than 15 minutes and transform a room into an emergency negative pressure isolation environment

Highly efficient air purification system that can be deployed in less than 15 minutes and transform a room into an emergency negative pressure isolation environment. [Download MedicAir PDF Brochure]

MedicAir – Portable Isolation Room Purifier

Description

  • Thousands of units successfully deployed worldwide
  • Convert ordinary Patient Rooms into Isolation Rooms in minutes
  • Microprocessor ensures minimum airflow to maintain negative room pressure as
    per CDC Standards
  • Automatically compensates motor speed for dirty filters
  • Instantaneously adjusts airflow to maintain required room pressure settings
  • LaserBlue Double Gel Filter Seal guarantees zero filter bypass
  • Comes with HEPA filters, germicidal UV lights, decontamination ports
  • Alarms when room pressure not achieved (door open)
  • Quick & easy installation
  • Dimensions: H x W x D
    45.5 x 22.25 x 14.25 (in), 175 lbs
    116 x 57 x 36 (cm), 80 kg
  • Airflow (nominal):
    560 CFM (264 liters/s);
  • Pre-filter: multi-layered, 30% efficient
  • HEPA filter:
    (2) Gel-sealed Cartridge Filters, remove 99.97% of particles down to 0.3 micron
    Filter seal: LaserBlue Gel
  • UV Light: (4) Germicidal UV Bulbs
  • Power: 120V, 60Hz, 4A / 230V, 50Hz, 2A
  • Sound level: < 54dbA at low speed
  • Cabinet: Heavy gauge welded steel
  • Download MedicAir PDF Spec Sheet

Contact Us