WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

Brushless blower motors have a higher capacity to move air than brushed motors however do so with less static pressure.  Static pressure can be thought of as suction and is measured  in inches of water column (wc.).  Thus a low suction unit will pull water perhaps 2 inches up a pipe and no more and thus would have a static pressure of 2″wc.  High power brushless motors have a maximum measurement of 44″wc. Continue reading

Advertisements

Table Top Laser Engraver Cutter Fume Odor Extractor Air Filtration

Laser and Laser Marking

LASERPURE Series – Table Top Filtration Station

  • Our new table-top design allows for Lasers whose feet up to 24″ (615mm) wide to be placed on top and exhausted via the rear to the LaserPure
  • We incorporate a pre filter section and a HEPA filter as well as an 8″ (203mm) deep chemical filter to eliminate odor and VOCs
  • The entire system is designed to be easily accessed from the front and is unique in that it incorporates our LaserBlue Gel seal that guarantees NO BYPASS of fumes
SPH1000-1.png (112289 bytes) SPH1000-2.png (146573 bytes) SPH1000-3.png (285523 bytes)

F071.png (147670 bytes)
F071
F074.png (255959 bytes)
F074
AG097.png (203498 bytes)

Call us for help in choosing the right Laser Cutter, Laser Engraver Fume, Odor, Extractor / Air Filtration System for your needs.

ACI Laser and Quatro Air Fume Extractor Compatibility Chart

Quatro Air ACI Laser Compatibility Chart
Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation.

Contact Us for help in choosing the right Laser Fume Extractor for your needs.

Laser Cutting Engraving Fume Extraction System – Epilog

List of supported lasers

We are proud to introduce our new breakthrough technology. We call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it’s elasticity, it allows zero bypass to any fumes, odors and VOCs. It’s NON toxic and NON porous as well.

GEL1.png (195404 bytes) GEL2.png (258932 bytes) GEL3.png (361573 bytes) GEL4.png (357858 bytes)

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

Laser Engraving Cutting Marking Fume Extraction System

 

Laser and Laser Marking – CSA-600 – Heavy Duty Dust & Odor Removal

Laser engravers, laser cutting, laser marking machines – very popular equipment and tool nowadays, but you have to admit, they do produce some nasty stuff – smoke, chemical fumes, gases, dust, odor. Your neighbors won’t like it, the people who work from you want to be protected from inhaling the toxic stuff. 😉

We have some great fume extraction system / air filtration system to choose from – relief from fumes, smoke, dust, chemical odors, you name it.

Laser and Laser Marking

Quatro Air has been the OEM supplier of choice for numerous manufacturers of laser engravers and cutters. Working closely with the manufacturers has allowed them to constantly improve their products and custom design the next generation of air filtration for the laser cutting, marking and engraving industry. They have been supplying units to the industry for the past eight years and are now on their fourth generation of product with innovations such as our zero bypass Laser Blue Gel. Manufacturers and customers have done extensive testing when comparing Quatro Air units to their competitors and time and time again we hear that Quatro Air Fume Extraction System / Air Filtration Systems are more powerful and quieter. We are confident that no other manufacturer of air purification systems can provide such industry proven technology that can compete with Quatro Air.

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

List of supported lasers

Quatro’s proud to introduce their new breakthrough technology, and we are happy and proud to be part of their team. They call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it’s elasticity, it allows zero bypass to any fumes, odors and VOCs. It’s NON toxic and NON porous as well.

Check out our webpage at – http://www.airpurifiers-r-us.com/laser_laser_marking.html

Contact Us / fill out the form below:

Fume Extractor for Laser Cutting Engraving Machine GCC model C-180

Our most popular unit for small to medium duty laser applications. The SPH uses high power blower motors to pull the air through 3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment.

Inquirer writes:

1. subject = suitability and price of the machine
2. email = raxxxxxxx@gmail.com
3. message = i want the best price at which u can provide me air purifier machine SPH-400 and want to know is this machine suitable to absorb the smoke and oder which is reliased from the machine laser cutting and engraving machine C-180 of GCC.reply as soon as possible…

As a matter of fact the Quatro SPH-400 fume extractor system, air filtration system, is recommended, suggested for use with the GCC model C-180.

  • Our most popular unit for small to medium duty laser applications
  • Designed to fit into an application where direct capture from the source is possible
  • The SPH uses high power blower motors to pull the air through  3 stages of filtration consisting of a pre-filter for large particulate, a certified HEPA filter to capture 99.97% of all particulate greater than 0.3 micron and a chemical filter with up to 40 lbs. (18kg) of odour and VOC treatment
  • LaserBlue Gel seal guarantees NO BYPASS
  • This unit is available in brushed and brushless versions
  • This unit has many options and can be customized for OEM applications.
  • | more info |

Contact Us


heavy dust particulate laser engraving marking cutting

Hi L,

We’re running through out HEPA filters (F074) like there’s no tomorrow!  Could you get another 3 to me?  If shipping is less than $50, just go ahead and charge my credit card please.  Thanks.

F

P.S.  I’m finding that I need to change filter every 10-15 hours or so of machine time.  I’m engraving bamboo mostly…are there any alternatives so it’s more cost effective?  Thanks.

Introducing the PF-400S – Pre Filter Section

Laser and Laser Marking

PF-400S – Pre Filter Section

Description

SPH400-PreF-3.png (120877 bytes) SPH400-PreF-2.png (153636 bytes)

F128.png (152449 bytes)
Dust Bag Filter – F128

Contact Us