Jetstream – Small Compact Dust Collector

Jetstream – Small Compact Dust Collector, Air Filtration System

Jetstream – Small Compact Dust Collector

Description

Rapidly becoming the standard for small engravers the JetStream offers significant advantages and performance over the competition.

  • Maximum airflow 110 CFM with a maximum pressure of 90″ W.C.
  • 1 micron pre-filter bag, easily replaced
  • 99.97% effective HEPA filter on particles larger than 0.3 micron
  • Built in silencer reduces noise to 49 dBA
  • Sleek, modern and easily portable
  • Full range speed control
  • CSA/UL approved motors with circuit breaker and thermal cut-out protection
  • Remote on-off communication
  • Optional 6 Gallon (26 l)Knock out bucket for larger debris

Call 1-800-626-0664, or Skype: lito.espinosa, or fill out the contact form below.

More on the Quatro Air SPH400 Fume Dust Odor Extractor Air Filtration System

Quatro Air SPH400 Series Fume Odor Dust Extractor Air Filtration System

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

  • The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.
  • The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.
  • This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

  • Depending on the type of media the modules could weigh as much as 40 lbs.
  • Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.
  • This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.
  • The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

Contact us – click on the link or fill out the contact form below.