Industrial Grade Air Purifier, Air Filtration Systems, 1000CFM, Wall Mount or Ceiling Suspended

Commercial, Industrial Grade air filtration system, air purifier, air scrubber, delivers 1000 CFM of air moving capability, can be configure for fine dust particulate removal, light chemical odor filtration, or heavy chemical gas, fumes, odor purification.

Can be suspended from the ceiling, wall mounted and / or mobile with heavy duty wheels / casters -versatile piece of air purification equipment.

Its multi-stage filtration lends itself to a wide range of air cleaning applications.

The unit itself is PRUDENTLY priced, so are the replacement filters.

The digital control panel is microprocessor controlled. Sweeeet!!

Find out more about it here.

Contact us for help with your product selection and / or advice. Call us toll free, 1-800-626-0664 or fill out and send the contact form below. We will get back to you soon as possible.

Have a wonderful day!!

Advertisements

Air Purifier Chemical Odor Fumes Gases

Refillable Chemical Filters (Activated Carbon – available in various blends for various needs)

They contain carefully engineered filtration chemical media blends to remove gases, odors, chemical vapors, and volatile organic compounds (vocs).

BP2000 Series

Take a closer look at our BP2000 series industrial, commercial grade air filtration system:

  • Effective solution to wide range of airborne chemicals and odors: exhaust gases, paints, lacquers, cleaning supplies, pesticides, building materials and furnishings, office equipment, glues, adhesives, disinfectants, and many more.
  • Reduce gas phase contaminants to below OSHA’s TLV levels.
  • Built to meet the regulations for ventilation rates for spaces up to 1200 square feet, the BP2000 is equipped with a high quality blower motor which guarantee a very high volumetric flow rate.
  • Highly customizable, capable to eliminate a huge variety of pollutants.
  • By using various combinations of filters and 26 different chemical filtration media, the BP2000 is the air filtration system of choice against high concentrations of aldehydes, alcohols, acids, VOCs, fluorinated hydrocarbons, chlorinated hydrocarbons, alkenes and alkanes, acetates and many other chemical groups.
  • Specifications:
  • Dimensions: 71″H x 24″W x 26″D, 350 lbs
  • Airflow (CFM): 1000 nominal, adjustable intake grills
  • HEPA filter: 99.97% of particles down to 0.3 micron; available in certain configuration
  • Chemical filter: up to 200 lbs; 26 blends available
  • UV Light: Available in certain configurations
  • Power: 120V, 60 Hz, 4A (240V available)
  • Sound levels: < 54dbA at low speed
  • Cabinet: Heavy gauge welded steel
  • Options: high air flow configurations; collars for ducting
Contact us for help with your product selection, toll free, 1-800-626-0664, or fill out the contact form on this page. Will get back to you soon as possible.
Have a wonderful day!!

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

WHAT’S THE DIFFERENCE BETWEEN BRUSHED AND BRUSHLESS MOTORS?

Brushless blower motors have a higher capacity to move air than brushed motors however do so with less static pressure.  Static pressure can be thought of as suction and is measured  in inches of water column (wc.).  Thus a low suction unit will pull water perhaps 2 inches up a pipe and no more and thus would have a static pressure of 2″wc.  High power brushless motors have a maximum measurement of 44″wc. Continue reading

Air Filtration Odor Removal Plastic Injection Molding Follow Up

Follow up to a previous post entitled “Air Filtration Odor Removal Plastic Injection Molding“, we’ve come to a recommendation of going with the BP2002 with two (2) chemical gas filter media stages.

We would include a hose collar to hook up with , we recommend, a 10″ flex hose – hose would be $20.00 / foot. The price of the BP2002 air filtration / air scrubber system is only $4046.00 USD (with the 10” diameter hose collar on the air intake side).

The BreathEasy BP2002 comes with two dust particulate filter stages: Pre-filter and Post filter. It also is configured with the two (2) stages of chemical gas filter (refillable canister housing for economy) for chemical fumes, gases, odor removal capabilities.

BP2000 General Specifications (2002)

The BP2000 is an upflow air filtration system

The system is equipped with a German designed motorized impeller  and a variable speed drive to allow airflows ranging between  300-1000 CFM  depending on the filter sequence. The blower section is equipped with a 1” thick acoustic liner allowing for +/- 50 DBa at 5 feet from the unit

The system casing is fabricated from 16 gauge satin coat welded steel painted with a two coat Polyurethane mat finish. Colour is computer beige.

The systems are mounted on industrial grade casters to allow for system portability.

The system is pre-wired to the system control panel with a standard 115 volt 7 foot long cordset to plug into any standard 115 volt outlet. Simply plug and play. Continue reading

Air Filtration Odor Removal Plastic Injection Molding

We received an inquiry for odor removal air filtration from a company that uses a plastic injection molding equipment / machine.

1. subject = Air Filtration – Odor Removal

2. email = jp@xxxxx.com

3. message = Can you please provide information and quote for an air filtration system to remove odor from a manufacturing environment?  We perform plastic injection molding and the odor from the plastic when heated can be irritating during the molding process of purging.  The air filtration unit must be portable and include flexible duct-work that can be manipulated/located over the molding machine when purging.  Thanks

JP –  Houston TX  PH (713) 295-xxxx.

We were sent these photos:

We have vent hoses (2 styles) over the material purge areas for normal operation.  We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room.  We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation. We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room. We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation.  We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room.  We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation. We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room. We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

Continue reading

Laser Cutting Engraving Fume Extraction System – Epilog

List of supported lasers

We are proud to introduce our new breakthrough technology. We call it the LASER BLUE GEL. This sleek blue design is nothing like the regular gasket you may find in other filtration units on the market. Due to it’s elasticity, it allows zero bypass to any fumes, odors and VOCs. It’s NON toxic and NON porous as well.

GEL1.png (195404 bytes) GEL2.png (258932 bytes) GEL3.png (361573 bytes) GEL4.png (357858 bytes)

Effective fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated. All of our systems feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and activated carbon modules. We offer systems for light-medium duty tabletop systems favored by hobbyists everywhere as well as mid-heavy duty cycle units for larger tables and/or significant particle accumulation. New this year is our SPH-400 pre-filter section which will turn our popular SPH-400 system into a true heavy duty dust collector.

1000 CFM 2000 CFM 3000 CFM Air Filtration Scrubber System

Looking for a 1000 CFM, 2000 CFM, 3000 CFM, Air Filtration Scrubber System – please contact us for more information.

Pro Series air filtration system high dust chemical odor removal ducting recirculating capabilities compact portable

AFHseries_dimensionAFH3004_elevationviewAFH3004_planviewContact Us – Click here or fill out the form below.