Two Epilog Zing Laser Machines, Cutting Plywood and Acrylic

Laser Fume Extractor Solution

Two Epilog Zing Laser Machines, Cutting Plywood and Acrylic


You will need one SPH426 (with PF401A) for each machine.

The alternative is one SPH82B5 (brushless motor ), $5330.00 with the PF801A ($830.00) pre-filter module.


Air Purifier, Brushless, Bagless, and Maintenance Free Industrial Motor

Excellent for EVERYTHING: Aluminous oxide, sand, quartz, glass beads, gypsum, die-stone, ceramic alloys, acrylics, resins, etc


  • “A-Mile-A-Minute High Performance Brushless Dust Collection
  • Unique sub-micron dust collection filtration down to 0.3 microns
  • “Slide & Glide” Rejuvenating Cartridge Filter System
  • Brushless, Bagless, and Maintenance Free Industrial Motor
  • No brushes or filter bags to change and replace
  • Comprehensive Extended Two Year Warranty Protection
  • Pre-Filter Collector & Odor Exhaust Filter upgrade features available
  • Available in a configuration with both air intake grill and clean air exhaust grill – optional flex hose collars, 1 x 6″ diameter, 1 x 8″ diameter or 2 x 6″ diameter, 2 x 8″ diameter
  • Velocity X4 delivers up to 600 CFM of air moving capability
  • Whisper quiet performance, 54dBa
  • Available in 120 or 230 volts single phase, 50 or 60 Hz

More on the Velocity X4 –

Call us toll free 1-800-626-0664 for help with your product selection or for placing your order. You can also send us a completed contact form below:

Laser Marking | Laser Engraving | Laser Cutting Fume Extractors – Brushed and Brushless


Brushless blower motors have a higher capacity to move air than brushed motors however do so with less static pressure.  Static pressure can be thought of as suction and is measured  in inches of water column (wc.).  Thus a low suction unit will pull water perhaps 2 inches up a pipe and no more and thus would have a static pressure of 2″wc.  High power brushless motors have a maximum measurement of 44″wc.  This makes them ideal for applications with VOCs, odors and light loads of dust.  Brushed motors on the other hand are measured at 90″wc and are ideally suited to conveying heavier smoke, heavier dust and any type of ‘sticky’ fume.  Not only do the brushed motors have more static pressure but the filters tend to last longer as the motor can continue to ‘suck’ air through dirty filters that might otherwise reduce the airflow and require changing in a brushless unit.  Brushed units are typically less expensive than the brushless units however they do require that the brushes be changed every 500-700 hours.  This is a simple procedure that takes approximately 2 minutes and the only tool required is a screwdriver.   Demonstration videos are provided for each of our products indicating how to perform this simple procedure.  Since there are many advantages to both types of blower motors many of our units are available with either type as an option.  If you have any questions or concerns about which type of blower motor is best suited for your application please call us at 1-800-626-0664 in North America or +1 514-421-0658 internationally to discuss it with one of our experts.

Brushless blower motors:


  • The most powerful at moving air, up to 300 CFM
  • Require no maintenance


  • Maximum static pressure 44″ wc
  • Expensive
  • Filters require more frequent changes with heavier types of dust.

Call for help with model selection – 1-800-626-0664

Air filtration system for fine dust particles as well as small amounts of chemical fumes

Air filtration system for fine dust particles as well as small amounts of chemical fumes

Prospective customer writes:

We are hoping to source a unit that can control fine dust particles as well as small amounts of chemical fumes (methyl methacrylate / butyl acrylate) released from cutting, routing or gluing solid surface substances such as Corian by Du Pont. We recently had a Ministry of Labour Hygienist come in to advise us about the possibility of combustible dust explosions and she was adamant that in any system where the five elements of a dust explosion are present: 1. Confinement, 2. Oxygen, 3. Explosive material, 4. Ignition source, 5. Dispersion – the employer is obligated to ensure that the machinery used to control the dust or fumes is appropriately rated for the task to prevent the possibility of dust explosions by removing at least one of the above elements – the easiest being the ignition source: static electricity or spark.

As such we are looking for an carbon filter or HEPA filter fitted unit capable of handling dust, and fume extraction while remaining a safe option for an environment with elevated levels of combustible gas.

Recommended solution, our Brushless CSA600 series, model / part number  CSA 6B5-S4G-ET

CSA-600 – Heavy Duty Dust & Odor Removal

  • The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.
  • A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.
  • A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.
  • Chemical compounds can be customized based on specific applications
  • With large collection bag, HEPA Filter & Deepbed Odor filters
  • LaserBlue Gel seal guarantees NO BYPASS
  • Dual hi-speed turbine for high suction, pressure & airflow
  • Whisper quiet operation is office friendly
  • Universal design allows for 2.5″, 3″, 4″ inlet along with discharge
  • Source capture arms available: Option 1, Option 2
  • Optional digital i-series control panel – highly recommended
CSA-626 2 Station
Height 45″(1140mm)
Width 21″(540mm)
Depth 13″(330mm)
Weight 140lb (63.50kg)
CFM 282 (480m3 / h)
W.C 90″
# / Pallet by Plane N/A
# / Pallet by Boat N/A

Contact Us for help in choosing the right air filtration system for your needs

Request for a PDF for the Brushless CSA600 series, model / part number CSA 6B5-S4G-ET. Call us toll free (North America) 1-800-626-0664, outside of North America call +1-514-421-0658 or complete the contact form below.