Up to 8 soldering stations can be filtered using a single QUATRO SPH-426 high pressure filter system

Up to 8 soldering stations can be filtered using a single Quatro SPH-426 high pressure filter system.

Systems comes complete with patent pending Laser Blue Gel Seal ensuring zero by-pass for any toxic fumes.

Each system comes complete with initial set of filters including a 30% ASHRAE rated pre-filter, 99.97% certified medical grade HEPA filter, and an 8 inch deep bed chemical filter.

The microprocessor control panel is complete with visual and audible alarms, digital speed control, the ability to be interlocked for remote on/off, auto flow adjusts speed of blowers as filters get dirty.

Available accessories include snap together ducting / piping, industrial heavy duty hose, and table mounted extraction arms with damper control and various nozzle attachments.

Call for help with your product selection and / or for assistance with placing your order: 1-800-626-0664.

You may also send us a filled out contact form – http://www.airpurifiers-r-us.com/contact.html

Thanks and have a wonderful day!!😊👌👍

Advertisements

PRINTING, GRAPHICS DESIGN INDUSTRY AIRBORNE DUST PARTICLE & CHEMICAL OFF-GASSING ODOR FILTRATION

PRINTING, GRAPHICS DESIGN INDUSTRY
AIRBORNE DUST PARTICLE & CHEMICAL OFF-GASSING ODOR FILTRATION

BreathEasy PRO series, BH and BHH Series, can provide air recirculation for both dust

capture-bp2000-features

control (HEPA filters capture 99.97 % of particles as small as 0.3 micron) as well as VOCs and chemical odor, chemical off-gasing. As most large format printers are aware, off-gassing from the print material doesn’t stop the instant that the material has printed. All of our systems are UL/CSA/CE certified and are available in 110V or 230V versions for shipping internationally.  Call us today about your printing application.

For virtually any application that requires removal of chemicals, odors, fumes, vapors and particles directly at the source, BP2000’s wide selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants before they spread into the surrounding environment.

Call us, toll free, 1-800-626-0664, for assistance with your product selection.

 

Air Filtration Systems for Dust, Chemical Odor, Gas Removal

We ship our air filtration systems world-wide, that includes customers in Mexico. 👍😊

Designed to handle high concentrations of chemicals, gases, odors, particles and biological contaminants, the BP2000 delivers superior air quality for residential and commercial spaces, office, healthcare facilities, clinics, labs, buildings and any workshops or production facilities that require effective air filtration.

The standard configuration for BP2000 is standalone unit for general air purification.

For virtually any application that requires removal of chemicals, odors, fumes, vapors and particles directly at the source, BP2000’s wide selection of flexible or articulated arms, hoods and ducting accessories capture any contaminants  before they spread into the surrounding environment.

More……

http://www.airpurifiers-r-us.com/breatheasy-pro-series.html

Contact us – http://www.airpurifiers-r-us.com/contact.html

Call too free (North America) 1-800-626-0664 | Outside of US and Canada 🇨🇦, Mexico 🇲🇽: 1-514-364-5538

SPH400, SPH426, Not Your Ordinary Laser Fume Extractor, Air Filtration System

Our most popular model Laser Fume Extractor for light and medium duty applications

The SPH400 series Laser Fume Extractor, Air Filtration System, is our most popular model for light and medium duty applications. It’s made here in North America, in Pointe-Claire, Quebec, Canada but has found its way to shops, labs, offices, workplaces around the world.

Here’s why.

4 stages, multi-stages of filtration

Capture-PF400-PF800

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

Same type of filter that is used in hospital operating rooms

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

Odors, Fumes – gas phase filter is quite large and 8” deep

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

Ideal at removing many VOC’s

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

A gel seal material to guarantee zero by-pass

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

High pressure blowers to overcome the resistance created by the deep bed chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

For more information, visit our webpage at : http://www.airpurifiers-r-us.com/laser-fume-extractor.html or contact us using the contact form below.

Light Duty 3D Printing Fume Extractor

Looking for a light duty 3D printing fume extractor, air filtration system?

Screen Shot 2017-07-26 at 2.41.38 PMLook no further, we have one for you.

Meet our Quatro SPL400 series dust / fume extractor / air filtration system.

Available with various useful optional pieces such as unit mounted capture arm with plexi nozzle, foot switch for remote on/off capabilities, choice of two filter sequence, for airborne particulate concern as well as mainly VOCs, chemical odor removal.

  • Ideal for 3D Printing , AM applications generating low debris
  • Medium pressure motorized brushless impeller
  • Enhanced mobility with heavy duty lockable casters
  • Multi-stage filtration system: pre-filter, HEPA and chemical filter
  • Whisper quiet operation
  • Optional digital control panel

Call us for help with your product selection, toll free: 1-800-626-0664, from anywhere in North America or fill out and send us the contact form below.

Happy 3D Printing everyone! 🙂

 

Fume Extractors for 3D Printing, Additive Manufacturing Technologies, AMT

Looking for fume extractor and / or an air filtration system solution to your 3D printing, AM application? We’ll be happy to assist you. Call us toll free, 1-800-626-0664 from anywhere in North America or +1-514-364-5538 outside of the Continental US and Canada.

You can also use the contact from below – we will get back to you as soon as possible.
Screen Shot 2017-08-14 at 1.47.09 PM

Learn more about 3D Printing aka AM (Additive Manufacturing):

3D printing, also known as additive manufacturing (AM), refers to processes used to create a three-dimensional object[1]in which layers of material are formed under computer control to create an object.[2] Objects can be of almost any shape or geometry and are produced using digital model data from a 3D model or another electronic data source such as an Additive Manufacturing File (AMF) file. STL is one of the most common file types that 3D printers can read. Thus, unlike material removed from a stock in the conventional machining process, 3D printing or AM builds a three-dimensional object from computer-aided design (CAD) model or AMF file by successively adding material layer by layer.[3]

 

Laser Cutting | Delrin

Laser cutting Delrin

DuPont™ Delrin® acetal homopolymer resin is a highly-crystalline engineering thermoplastic.

Our Laser Fume Extractors generally come with deep bed chemical filtration (we have one that’s 8” deep, one that’s 15” deep) loaded with our general purpose chemical media blend. For most applications the general purpose blend would suffice.

If you’re cutting materials such as Delrin you will most likely require a special combination of chemical filtration with a mix of chemical media blend to be effective in dealing with the fumes produced in the process of cutting Delrin.

We suggest you let us know what materials you work with in order for us to provide you the best recommendation for your air filtration, fume extraction needs.

Effective laser fume extraction is critical to laser systems due to the possibility of toxic, carcinogenic corrosive or extremely odorous contaminants that can be generated.  All of our laser fume extractors feature multi-stage filtration incorporating a 2” Pre-filter section, 2” Certified HEPA filter and deep bed activated carbon modules.

cover-laser-brochure

Laser Fume Extractors | Air Filtration Systems | High Pressure | High Speed Turbine Motor / Blowers

Contact Us for help with your product selection:

  • Toll Free: 1-800-626-0664 or 1-888-395-0330 (North America- Continental USA and Canada)
  • Fax: 1-514-651-3995
  • Skype: lito.espinosa
  • Outside of North America: 1 (514) 364-5538