Laser Fume Extractor System to match with a Full Spectrum Laser Machine

Very pleased to supply a customer searching for a good laser fumes extraction system , smoke and odor extractor, air filtration system to match with their newly purchased Full Spectrum Laser Machine.

Meet your new friend, the Quatro Air Technologies SPH-400 series laser fume, dust, smoke, odor extractor, air filtration system. You can trust and rely on it to provide you a clean air work environment.

laser fume, dust, smoke, odor extractor system and air filtration system

The Quatro Air SPH400 Fume Extractor and Air Filtration System is designed with up to 4 stages of filtration each targeted for removal of specific size particles and gases.

There are a series of filters in the system to ensure that all particulate matter/ dust is removed efficiently:

The unit contains multi-layer knock out pad filters, Deep Pleated high capacity safety filters and a MERV 17 99.97 % HEPA filter.

The HEPA filter is the last particulate filter in the sequence and it is designed to remove 99.97% of all particulate matter that is 0.3 microns and larger.

This is the same type of filter that is used in hospital operating rooms. Please note as the filters begin to get dirty they also become more efficient making the system more efficient as time goes on. This occurs as it gets more and more difficult for the dust to pass through the filter due to the passages becoming smaller as they become filled with debris.

The gas phase filter is quite large and 8” deep in direction of airflow. We have 26 different types of chemical media that can be incorporated into the chemical filter to address and deal with specific contaminants if required.

Depending on the type of media the modules could weigh as much as 40 lbs.

Our standard and most typical module contains a virgin bituminous coal extruded 3-4 mm carbon pellet.

This carbon is ideal at removing many VOC’s and has a holding capacity as high as 25 % by weight. Initially the removal efficiency will be 100% for most VOC’s. Over time the mass transfer zone will travel through the chemical filter as it gets consumed.

The chemical filter is seated inside a gel seal material to guarantee zero by-pass of the chemical filter. This is the same material that is used in Pharmaceutical and Hospital environment clean rooms. All gases therefore must pass through the chemical filter

Unlike other systems that have a sprinkling of carbon our gas phase chemical filter is quite large and requires the use of high pressure blowers to overcome the resistance created by the deep bed chemical filter. Our blowers are capable of generating 90” water column of pressure. With this type of blower as the filters begin to get dirty and plugged we can still effectively overcome this increase in pressure. The system is equipped to advise you when the filters need to be changed.

Call us for help in choosing the right air filtration system for your needs, Toll free in North America: 1-800-626-0664 or fill out the contact form below.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s