Air Filtration Odor Removal Plastic Injection Molding

We received an inquiry for odor removal air filtration from a company that uses a plastic injection molding equipment / machine.

1. subject = Air Filtration – Odor Removal

2. email = jp@xxxxx.com

3. message = Can you please provide information and quote for an air filtration system to remove odor from a manufacturing environment?  We perform plastic injection molding and the odor from the plastic when heated can be irritating during the molding process of purging.  The air filtration unit must be portable and include flexible duct-work that can be manipulated/located over the molding machine when purging.  Thanks

JP –  Houston TX  PH (713) 295-xxxx.

We were sent these photos:

We have vent hoses (2 styles) over the material purge areas for normal operation.  We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room.  We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation. We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room. We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation.  We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room.  We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

We have vent hoses (2 styles) over the material purge areas for normal operation. We would like additional venting when we perform heavy purging and the existing venting cannot keep up and a strong odor results in the manufacturing room. We would like this ancillary filtration system to have a vent hose that we can place in close proximity to the existing vent hood and pull the excessive purging fumes into during heavy purging.

Basically what we need to the help the client with is to supply an air filtration system that’s portable, equipped with a fair amount of chemical gas filter / activated charcoal filtration, good pulling / suction power (high static pressure capability to draw contaminated air through a deep bed of chemical gas filter media) , with air intake ducting / collar hose adapter – to capture, reduce, the fumes, odors, that leaks out, not captured by the existing venting system – keep the surrounding area of the plastic injection molding equipment relatively odor free / reduce chemical odor exposure to those who work in the vicinity.

For source capture with have excellent fume extractors such as the CSA600 series.

     The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment.  A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters.  A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload.  Chemical compounds can be customized based on specific applications     With large collection bag, HEPA Filter & Deepbed Odor filters     LaserBlue Gel seal guarantees NO BYPASS     Dual hi-speed turbine for high suction, pressure & airflow     Whisper quiet operation is office friendly     Universal design allows for 2.5", 3", 4" inlet along with discharge


The CSA is the workhorse fume extractor of the laser industry; designed to operate in a heavy duty environment. A large pre-filter bag that is easily accessed to change via a convenient side panel eliminates much of the debris that might otherwise clog the more expensive HEPA filters. A huge chemical bed of 66Lb. (30kg) provides significant odor and VOC protection for much longer than the light duty units again providing a solution that can withstand a heavy workload. Chemical compounds can be customized based on specific applications
With large collection bag, HEPA Filter & Deepbed Odor filters
LaserBlue Gel seal guarantees NO BYPASS
Dual hi-speed turbine for high suction, pressure & airflow
Whisper quiet operation is office friendly
Universal design allows for 2.5″, 3″, 4″ inlet along with discharge

A stand alone recirculating system from our BreathEasy PRO series, one that’s configured for odor control capabilities is also recommended.

Heavy odor control air filtration - Filter configuration Pro Series air filtration system high dust chemical odor removal ducting recirculating capabilities compact portable

Heavy odor control air filtration – Filter configuration
Pro Series air filtration system high dust chemical odor removal ducting recirculating capabilities compact portable

Contact Us for help in choosing the right air filtration system for your needs.

Advertisements

One thought on “Air Filtration Odor Removal Plastic Injection Molding

  1. Pingback: cleanairsolution | Air Filtration Odor Removal Plastic Injection Molding Follow Up

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.